625738
31
Zoom out
Zoom in
Previous page
1/57
Next page
31
GYSFLASH 30-24 HF
ES
Ajuste de la tensión:
Tras haber seleccionado la tensión nominal de la batería, se puede congurar la tensión por secuencias de 0,1 según las recomendaciones
del fabricante.
CONFIGURACIÓN EN MODO DIAG +
6.0V
6.1V
...
7.4V
DIAG+
U=13.5V
12V
DIAG+
U=27.2V
24V
DIAG+
U=13.5V
12V
6V
12V
24V
12.0V
12.1V
...
14.8V
24.0V
24.1V
...
29.6V
Puesta en marcha:
• Conecte la pinza roja en el polo positivo y la pinza
negra sobre el polo negativo de la batería.
• Presione START/STOP para iniciar el proceso en
este modo.
• Durante su uso, se indican la corriente consumida
y la tensión instantánea.
PUESTA EN MARCHA DEL MODO DIAG+
I=12A
DIAG+
U=13.5V
DIAG+
U=13.5V
12V 12V
Precaución: Antes de iniciar la función Diag, si se indica una corriente superior a 10A, esto signicará que su batería está
descargada. Su Gysash suministrará una corriente de recarga. Compruebe que no haya dispositivos encendidos en el vehí-
culo. Espere a que la intensidad pase por debajo de 10A para iniciar la operación de diagnóstico.
MODO SUMINISTRO SHOWROOM
En vehículos parados, el Gysash compensa la corriente utilizada hasta 30A (y 15A en 24V) al comprobar los dispositivos electrónicos como
la calefacción, el elevalunas, la suspensión eléctrica, etc, suministrando una tensión estable a los vehículos de demostración:
- de 12V a 14,8V (para baterías de 12V)
- de 24V a 29,6V (para baterías de 24V).
- de 6V a 7,4V (para baterías de 6V).
Ajuste de la tensión:
Tras haber seleccionado la tensión nominal de la batería, se puede congurar la tensión por secuencias de 0,1 según las recomendaciones
del fabricante.
AJUSTE DEL MODO SHOWROOM
6.0V
6.1V
...
7.4V
SHOWROOM
U=13.5V
12V
U=27.2V
24V
U=13.5V
12V
6V
12V
24V
12.0V
12.1V
...
14.8V
24.0V
24.1V
...
29.6V
SHOWROOM
SHOWROOM
Puesta en marcha:
• Conecte la pinza roja en el polo positivo y la pinza negra
sobre el polo negativo de la batería.
• Presione START/STOP para iniciar el proceso en este
modo.
• Durante su uso, se indican la corriente consumida y la
tensión instantánea.
PUESTA EN MARCHA DEL MODO SHOWROOM
SHOWROOM
13.5V
I=12A
SHOWROOM
U=13.5V
12V12V
Puesta en marcha sin batería (no recomendada):
Se puede iniciar el suministro eléctrico sin batería presionando sobre START/STOP durante 3 segundos.
La indicación « no battery » se mostrará durante un segundo antes de iniciar el suministro eléctrico.
CUIDADO: una inversión de polaridad puede tener repercusiones negativas en los dispositivos electrónicos del vehículo.
Precaución:
Precaución: Antes de iniciar la función Showroom, si se indica una corriente superior a 10A, esto signicará que su batería está descargada.
Su Gysash suministrará una corriente de recarga. Compruebe que no haya dispositivos encendidos en el vehículo. Espere a que la intensi-
dad pase por debajo de 10A antes de utilizar los dispositivos eléctricos del vehículo.
MODO CAMBIO DE BATERÍA (OPCIONAL)
El Gysash asegura un suministro eléctrico estable para las necesidades del vehículo durante el cambio de batería para poder proteger las
memorias. Por defecto, este modo está inactivo y no aparece en la lista de modos. Se puede activar mediante el menú de conguración
Expert (veáse página 34).
Ajuste de la tensión:
Se puede elegir entre 6V, 12V y 24V para el cambio de batería:
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSFLASH 30-24HF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSFLASH 30-24HF in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info