625738
30
Zoom out
Zoom in
Previous page
1/57
Next page
30
GYSFLASH 30-24 HF
ES
• Expert : curva de carga de tipo IU
0
I
0
U personalizable mediante el menú «Avanced Menu» y reservado a las personas experimen-
tadas (véase página 34). Por defecto, esta curva está inactiva y no aparece en la lista de curvas del modo Carga. La curva Expert
está disponible solamente en el modo de carga automóvil. ATENCIÓN: Según el ajuste de la curva Expert (ver página 34), puede
ser necesario desconectar la batería del vehículo antes de comenzar la carga para proteger los dispositivos electrónicos del vehículo.
CONFIGURACIÓN EN MODO CARGA
AUTOMÓVIL
CONFIGURACIÓN EN MODO CARGA TRACCIÓN
Easy
Liquido
Gel/AGM
Expert
10Ah
20Ah
...
400Ah
CARGA 12V
Gel/AGM 80Ah
12V
80Ah
12V
80Ah
CARGA
Gel/AGM
CARGA
Gel/AGM
CARGA 12V
Gel/AGM
6V
12V
24V
80Ah
gel/AGM
liquido
50Ah
60Ah
...
260Ah
TRACCION 12V
gel/AGM
80Ah
12V
80Ah
12V
80Ah
TRACCION
gel/AGM
TRACCION
gel/AGM
TRACCION 12V
gel/AGM
6V
12V
24V
80Ah
PUESTA EN MARCHA DE
LA CARGA DE AUTOMÓVIL
10%
12V
80Ah
CARGA
CARGA
Gel/AGM
U=12.5V
Q=2.5Ah
I=10A
00h22
PUESTA EN MARCHA DE LA CARGA DE TRACCIÓN
10%
12V
80Ah
TRACCION
TRACCION
Gel
U=12.5V
Q=2.5Ah
I=10A
00h22
TIEMPO DE CARGA TRACCIÓN.
6V/12V
50 Ah 150 Ah
~ 8h*
160 Ah 260 Ah
9h 14h
30 HF
24V
50 Ah 70 Ah
~ 8h*
80 Ah 130 Ah
9h 14h
*Si se desea, se puede reducir el tiempo de carga insertando una capa-
cidad ligeramente superior a la capacidad nominal de la batería (máximo
+20%). Ejemplo: para una batería de 100 Ah, ajustar el cargador a
110Ah permite reducir el tiempo de carga en alrededor de 45min.
Puesta en marcha:
• Conecte la pinza roja en el polo positivo y la pinza negra sobre el polo negativo de la batería.
• Presione START/STOP para iniciar la carga.
• Durante la carga, el producto indica el porcentaje de avance de la carga y de forma alterna, la tensión, la corriente, el
amperaje/hora inyectado y el tiempo transcurrido.
• Presione de nuevo para interrumpir la carga.
Nota: Al nal de la carga (100%), el cargador mantiene el nivel de carga de la batería aplicando una tensión tipo oating.
Precaución: Compruebe el nivel del electrolito en baterías abiertas. Restablezca el nivel si fuese necesario antes de la carga.
Cuando se carga sobre el vehículo, se aconseja reducir al mínimo el consumo eléctrico del vehículo (apagar los
faros, cortar el contacto...) para no alterar el proceso de carga.
MODO SUMINISTRO ELÉCTRICO DIAG+
En vehículos parados, el Gysash compensa la corriente utilizada hasta 30A (y 15A en baterías de 24V) al comprobar dispositivos
electrónicos de mayor consumo como la ventilación del motor, el elevalunas, la suspensión eléctrica, etc, suministrando una tensión
estable:
- de 12V a 14,8V (para baterías de 12V).
- de 24V a 29,6V (para baterías de 24V).
- de 6V a 7,4V (para baterías de 6V).
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSFLASH 30-24HF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSFLASH 30-24HF in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info