Manual Gymrex GR-MG 61 (page 25 of 114) (English, German, Danish, French, Italian, Polish, Spanish)

779055

Zoom out

Zoom in

1/114

11 – Footrest

12 – Backrest support frame

13 – Backrest

14 – Training handle

a) Place the load arm (9) between arm bracket mounting plates (1). Align the hole

axes. Pass the rotating roller through the hole. Secure the arm on both sides

with bearing washers and M8x25 screws.

b) Insert the load holder (10) into the arm hole axis (9). Secure with an M8 washer

and M8x30 screws. Finally, install the guard.

c) Connect the footrest (11) to the load arm (9). From the inside, insert the

footrest bracket axis into the lower axis of the arm hole. Attach the bottom

fastener with an M8 washer and M8x30 screw, from the outside. Attach the

upper fastener with an M12 washer and M12x20 screws, from the inside.

d) Connect the backrest support frame (12) to the machine frames (1, 3, 5). When

inserting the backrest support frame, align the hole axes. From the top, insert

the training handle (14) into the hole axes, at the contact point of the backrest

bracket (3) and the backrest support frame (12). Connect the resulting

assembly using M12x105 screws and M12 washers. Fix the remaining holes

with M12x75 screws and M12 washers.

e) Place the backrest (13) on the support frame (12). Fasten with M8 washers and

M8x25 screws.

f) Finally, attach the spare load holder to the moving arm bracket (1). Fasten with

M12x30 screws, M12 washers and M12 locknuts. Guide the screw from the

inside.

Fasten using the procedure described in STEP I, item a) (see the drawing).

All connections of the machine should be fixed and pressed correctly. After

completing the assembly activities, it is allowed to start working with the machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gymrex GR-MG 61 in the language / languages: English, German, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gymrex GR-MG 61 Manual

Product: