779055
23
Zoom out
Zoom in
Previous page
1/114
Next page
1 Moving arm bracket
2 Moving arm bracket base
3 Backrest bracket
4 Lower support frame fastener
5 External backrest bracket
6 Backrest bracket base
7 Leg protection
8 Leg protection support frame
a) Connect the moving arm bracket base (1) to the moving arm bracket base (2).
For this purpose, use M12x135 screws, M12 washers and M12 safety nuts.
Insert an M12 washer onto main fixing screw (M12x135). Align the bracket
base and fastener hole axes. Insert the previously prepared mount into the
hole axis, from the outside. Secure with a washer and nut from the inside.
Repeat the procedure for all holes.
b) Place the outer backrest bracket (5) on the lower base of the backrest bracket
(6). Align the hole axes. Fasten with M12x135 screws, M12 washers and M12
locknuts. Guide the screw from the floor upwards.
Fasten using the procedure described in item a) (see the drawing).
c) Use the procedure described above to fix the backrest bracket (3) to the lower
support frame fastener (4).
d) Place the lower support frame fastener (4) between the moving arm bases (1)
and the backrest bracket (6). Align the hole axes. Fasten with M12x75 screws,
M12 washers and M12 locknuts. Guide the screws from the side of outer
bases.
e) Place the leg protection support frame (8) between the outer backrest bracket
(5) and the moving arm bracket (1). Align the hole axes. Insert an M12x75
screw and M12 washer into the hole axis, from the outside. Secure from the
inside with an M12 washer and M12 nut. Fasten using the procedure described
in item a) (see the drawing). Repeat the procedure for all holes.
f) Place the leg protection (7) on the leg protection support frame (8). Fasten
from the outside with M8 washers and M8x45 screws.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gymrex GR-MG 61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gymrex GR-MG 61 in the language / languages: English, German, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info