Manual Gutmann VISUAL (page 24 of 44) (English, German, Dutch, French, Italian, Spanish)

651765

Zoom out

Zoom in

1/44

Metal filter

Removing the filters

Fire hazard! The performance of the

extractor hood is reduced by grease

residues and the fire hazard increases.

To prevent a fire hazard, you must clean

the filters regularly. The grease filters

must be cleaned at the least once a

fortnight. To do this, grip the metal filter

with both hands at the top and bottom

and pull forward until the magnet con-

tact releases. You can now remove the

metal filter. Installation in reverse order.

Cleaning the filters

The stainless steel filter is best cleaned

in the dishwasher or with a mild dish-

washing agent. The manufacturer ac-

cepts no liability whatsoever for any

discolouration caused by the use of ag-

gressive dishwashing agents. Tempera-

tures exceeding 55 degrees Celsius

must be avoided. Caution: Do not use

three-phase cleaning agents or clean

the filter in a commercial dishwasher.

Cleaning with aggressive agents such

as petrol, acetone, trichlorethylene, etc.

will destroy the filters! Refit the metal

filters after cleaning.

Activated carbon filter

The C version model offering the recir-

culation mode contains an activated

carbon filter in the tower. Please refer to

the separate instructions entitled

"Activated Carbon"!

Exchange of the lighting

Please cut the connection between the

extractor hood and the power supply

system! The lighting remains hot for

some time. Please wait therefore for

some time till the lighting has cooled off.

For the exchange of the lighting at first

please take the retaining ring (c) out of

the extractor hood with a screwdriver.

Afterwards solve the plug of the light

bulb (a) and separate it from the fixture.

Therefore the feather ring (b) must be

crushed and be removed upwards. The

installation of the new lighting is made in

reverse order.

Faults

Please contact our service department

immediately, if:

- If the extractor hood creates unusual

noises and you are unable to detect any

faults after checking the extraction air

line

- If you discover, for example, by hear-

ing strange noises, that the motor is

faulty or defective

- the switches are not working properly.

Please remember to indicate your ex-

tractor hood model and the correspond-

ing serial number. This information can

be found on the type plate. This plate is

located inside the hood near the filters.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gutmann VISUAL in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gutmann VISUAL Manual

Product: