Manual Gutmann VISUAL (page 23 of 44) (English, German, Dutch, French, Italian, Spanish)

651765

Zoom out

Zoom in

1/44

off the appliance. The intensive setting

automatically switches back to high fan

power after three minutes (setting 3).

Automatic after-run

Press the button with the clock symbol

to activate the after-run time. The ex-

tractor hood switches back from level 3

to level 1and runs for ~15 min. at this

setting before switching off.

Lighting

Press the button with the lighting symbol

to switch in the lighting. Press again to

switch off the lighting. The lighting is

dimmed by pressing and holding the

button. Press and hold the button again

to increase the brightness. The fan can

switch itself on automatically after a long

period of standalone operation of the

lighting. This overheating protection

function automatically switches the fan

off again.

Display grease filter cleaning

If the grease filter display lights up

(button on the right), the filter must be

cleaned. After cleaning the filter, press

and hold the right-hand button for at

least five seconds. The indicator lamp

goes out. The grease filter indicator is

activated after max. 15 operating hours

or every two weeks (even if no cooking

takes place during this time).

Cleaning and care

Cleaning the surfaces

Danger due to electric shock! Discon-

nect the extractor hood from the power

supply by pulling the plug out of the

socket or by switching off the fuse.

When cleaning, make sure that no water

penetrates the device. Regular cleaning

of the surface saves laborious removal

of stubborn contamination. Only use

conventional detergents or universal

cleaning agents suitable for cleaning

stainless steel/aluminium. Never use

abrasive cleaning agents or steel wool.

After cleaning the hood, treat the

stainless steel surfaces with a stainless

steel care product. Painted surfaces

should only be cleaned using a mild

detergent solution and a very soft cloth.

Only use a soft damp cloth to clean the

operating panel.

On hoods fitted with a panel below the

filter (edge extraction), grease deposits

occur at the edge of the panel. These

deposits occur for physical reasons and

are not due to a malfunction of the hood.

Please clean the panel underneath the

filter regularly to prevent the formation of

stubborn residues.

Cleaning and care instructions

When cleaning the grease filters, also

remove any grease deposits from the

accessible housing components. This

will prevent a fire hazard and maintain

an optimum range of functions. Use hot

soapy water or a mild window cleaning

agent to clean the hood. Do not scratch

off baked-on deposits. Soften them us-

ing a damp cloth. Do not use abrasive

agents or scouring pads.

Note: Do not use alcohol (spirits) on

plastic surfaces, as dull spots may re-

sult.

Caution: Ventilate the kitchen suffi-

ciently, no open flame.

Only clean the operating panel with a

soft damp cloth (mild detergent solu-

tion). Do not use stainless steel cleaners

for the sliding switch/pressure switch.

Stainless steel surfaces:

Use a mild and non-abrasive stainless

steel cleaning agent. Do not clean

stainless steel surfaces with abrasive

scouring pads or with cleaning agents

containing sand, soda, acid or chloride!

Clean in direction of polish only.

We recommend our stainless steel

cleaner no. 461731. See the enclosed

service booklet for the order address.

Aluminium, varnished and plastic

surfaces:

Use a soft micro fibre cloth. Do not use

dry cloths. Use a mild window-cleaning

agent. Do not use aggressive cleaning

agents or agents containing acid or lye!

Do not use scouring agents.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gutmann VISUAL in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gutmann VISUAL Manual

Product: