784114
28
Zoom out
Zoom in
Previous page
1/36
Next page
EN
28
Stainless steel surfaces:
Use a mild and non-abrasive stainless
steel cleaning agent. Do not clean
stainless steel surfaces with abrasive
scouring pads or with cleaning agents
containing sand, soda, acid or chloride!
Clean in direction of polish only.
We recommend our stainless steel
cleaner no. 461731. See the enclosed
service booklet for the order address.
Aluminium, varnished and plastic surfaces:
Use a soft micro fibre cloth. Do not use
dry cloths. Use a mild window-cleaning
agent. Do not use aggressive cleaning
agents or agents containing acid or lye!
Do not use scouring agents.
Metal filter
Filter removal
Fire hazard! The performance of
the extractor hood is impaired by
greasy residues, and the risk of fire
increases. To prevent any fire haz-
ards, necessarily clean the metal
filter on a regular basis. The grease
filters should be cleaned every 14
days at the latest. The need to
clean the grease filter is also speci-
fied on the LED indicator: after 15
hours of operation, the red LED on
the ceiling unit starts flashing - at
that point, please clean the metal
filter. Easily pull down the glass
detergent.
The manufacturer does notac-
cept liability for any discoloration
due to the use of aggressive clean-
ing agents. Temperatures above 55
degrees should be also avoided.
Warning: Do not use any 3-phase
or multi-phase cleaners. DO NOT
clean the metal filter in a commer-
cial dishwasher. Cleaning with ag-
gressive products such as petrol,
acetone, trichlorethylene, etc. will
destroy the metal filter!
Please note: Due to a galvanic re-
action occurring during the flushing
process, the metal grease filters must
not be washed simultaneously with
silver cutlery or silver tableware. Un-
fortunately, the customer shall not be
entitled to any reclaim if this fact is not
taken into account.
Refit the metal filter after the clean-
ing process ensuring that , then
press and hold the toggle switch (F
= Filter saturation) on the right side
for at least 10 sec. until the red
LED goes out. The operating hours
meter will reset and the red LED
goes out. The lift again the glass
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gutmann EM 09 - Planea at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gutmann EM 09 - Planea in the language / languages: English, German as an attachment in your email.

The manual is 2.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info