624753
17
Zoom out
Zoom in
Previous page
1/152
Next page
GB
17
to be fitted in correctly and should meet any
conditions of perfect functioning.
If this instruction manual does not state
otherwise, the damaged parts and safety
devices should be repaired or replace by an
authorised servicing centre.
Have the damaged switched replaced in an
authorised servicing centre.
This unit is in compliance with all the
respective safety provisions. The repairs
should be done by a qualified electrician in
an authorised servicing centre and use
genuine spare parts. Failing to follow this
command a risk of accidents arises.
This unit may do grooves, slits etc. only if a
suitable additional guards are added above
the bench (closed around).
1. The saw should not be used for impact works
(matching splits etc.)
Emergency Action
Apply the first aid adequate to the injury and get
qualified medical assistance as quickly as
possible. Protect the injured person from more
accidents and calm him/her down.
Signs on Unit
Meaning of Symbols
Symbols shown below are used throughout this
manual and/or on the unit:
Product Safety
Product compliance with
respective EU standards
Protection insulation
Bans:
General ban
(in combination with another
pictograph)
Do not reach in rotating parts
Warning:
Warning/caution
Beware of hazardous electrical
voltage
Commands:
Use goggles Use ear protectors
Read operating manual before use Wear hard hat
Wear protection gloves
Environment Protection:
Wastes to be disposed of in a
professional manner not to harm
the environment .
Cardboard packaging to be
collected for recycling .
Faulty and/or disposed of
electrical/electronic appliances to
be collected by authorised salvage
places .
Green Dot –Duales System
Deutschland AG
Packaging:
Protect from moisture Keep Up
Technical Data:
Connection Motor power
Speed - rpm Saw blade
Acoustic output level Cutting depth 90°
Cutting depth 45° weight
Assigned Use
The bench, trimming and mitre saw is assigned
to cut wood and soft plastics longitudinally,
laterally, for trimming and mitre cuts. The round
materials (tubes, rounds) are not allowed for
being cut with the saw.
Cutting metals is not permitted.
On no adherence of the generally valid
regulations provisions and the provisions in this
manual, the manufacturer should not be held
liable for damages. .
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude TKGS 1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude TKGS 1800 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info