624524
12
Zoom out
Zoom in
Previous page
1/72
Next page
6. Retighten the oil drain screw (pic. 1/11). Then, let the
appliance go idle several times. At regular intervals,
check the oil level and add some if necessary.
Transport
To take the appliance out of the package, at least 2
persons are necessary.
The appliance can be transported in an inclined position
on wheels.
Use the carrying handle – lift the appliance and pull it.
Storage conditions: A dry, roofed storage place, maximum
air humidity of 80%, temperature of -20°C to +60°C.
The screw must necessarily be tightened whenever the
appliance is to be transported to prevent oil leak.
Make sure the appliance is transported in a vertical
position.
Troubleshooting
The table shows possible failures, their causes and
remedy options. If the problem still cannot be removed,
contact a professional to help you.
Switch the appliance off and unplug it before any
servicing and cleaning.
Risk of electric shock.
Symptoms
Possible cause Remedy
Engine
automatically
finishing the
splitting cycle
Protective equipment
against overvoltage
has been activated
Electrician
Wood not
being split
Appliance installed
improperly
Split wood length
exceeds the engine
capacity
Splitting wedge is blunt
Oil leaking
Fit the split
wood
properly, see
the Operation
section
Cut the split
wood to
appropriate
size
Splitting
wedges
needs to be
ground down
Identify the
untight points
and contact a
professional
Pressure plate
Lack of oil or excess of
air in the hydraulic
system
Check the oil
level. Add oil
if necessary.
Contact a
professional.
Oil leaking on
the cylinder or
in any other
place
Air in the hydraulic
system during
operation
Bleeder valve not
tightened before
transport
Oil drain screw is
loosen
Defective oil valve
and/or sealing.
Loosen the
bleeder screw
a few turns
before use
Tighten the
air vent screw
before
transport
Tighten the oil
drain screw
Call the
dealer
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude SPALTY W 370-4T 94698 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude SPALTY W 370-4T 94698 in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info