624524

Gude SPALTY W 370-4T 94698 Manual

11
Zoom out
Zoom in
Previous page
1/72
Next page
Warranty
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on
the day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with
indication of date of sale must be presented in case of
claiming for the warranty rights.
Warranty does not cover unprofessional use such as
device overload, violent use, damage caused by third party
or foreign materials, failure to comply with operations and
assembly manual, and normal wear and tear.
Behaviour in case of emergency
Provide necessary first aid treatment corresponding to the
injury nature and seek qualified medical help as soon as
possible.
Protect the injured person from other injuries and calm
him/her down.
In case of accident, first aid kit must always be
available in the place of your work in accordance with
DIN 13164. Material taken out of the first aid kit needs
to be supplemented right away.
Please provide the following details
if help is needed:
1. Place of accident
2. Accident nature
3. Number of injured persons
4. Injury type
Disposal
The disposal instructions are based on icons placed on the
appliance or its package. The description of the meanings
can be found in the “Marking“ section.
Transport package disposal
The package protects the appliance against damage
during transport. Packing materials are usually chosen
depending on their environmental friendliness and disposal
method and can therefore be recycled.
Returning the package to material circulation saves raw
materials and reduces waste disposal costs.
Parts of packages (e.g. foils, styropor®) can be dangerous
to children. Risk of suffocation!
Keep parts of packages away from children and dispose
them as soon as possible.
Operator requirements
The operator must carefully read the Operating
Instructions before using the appliance.
Qualification
No special qualification is necessary for using the
appliance apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 18
years of age. An exception includes youngsters operating
the appliance within their professional education to
achieve necessary skills under trainer's supervision.
Training
Using the appliance only requires appropriate instructions
by a professional or reading the Operating Instructions.
No special training necessary.
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless
bureaucracy at our webpage www.guede.com in the
Services part. Please help us be able to assist you. To
identify your appliance when claimed, we need to know its
serial No., order No, and year of production. All these
details can be found on the type label. Enter the details
below for future reference.
Serial No.
Order No.
Year of production:
Tel. +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
Email: support@ts.guede.com
The appliance must always be unplugged before any
servicing/cleaning and other works on the appliance. Let
the appliance cool down before any work and transport.
Servicing
Any changeover, adjustment, measurement and cleaning
to be performed when the engine is off only. Unplug the
appliance.
Have any repairs and servicing of the electrical equipment
executed by electricians only.
All protective and safety equipment must be immediately
refitted after any repair or servicing is finished.
Our recommendations:
The splitting knife is a wearable part that must be
additionally ground down if necessary.
The combined two-handed protective equipment
must run smooth. To be lubricated with a few oil
drops from time to time.
Keep the supporting surface clean.
Lubricate the slide bars with grease.
Hydraulic equipment/oil change
The hydraulic equipment is a closed system with an oil
tank, oil pump and control valve. It must not be changed
or handled with.
At regular intervals, check the connections and screw
connections if tight and tighten them if necessary.
The oil tank has been factory-filled with high-quality
hydraulic oil with ISO 20 viscosity level.
Change the oil after every 150 hours of operation
1. The pressure plate is in the starting position. Unplug
the appliance now.
2. Loosen the oil drain screw (pic. 1/11) and put it aside.
3. Put an empty 4-litre bowl next to the appliance and
position it as shown in pic. 4). Wait until all the old oil
gets drained out. Dispose it in an environmentally
friendly manner!
4.
Turn the appliance upside down (pic. 4) to add app.
2.4 l of hydraulic oil (viscosity 20).
5. An oil gauge is fitted in the oil drain screw (pic. 1/11).
Clean it and insert it in the appliance that is still in the
vertical position. Pull it out again – the oil level should
be between both notches.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude SPALTY W 370-4T 94698 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude SPALTY W 370-4T 94698 in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info