GB
7. Wear goggles. The objects may be thrown in your face.
8. Wear ear protectors. Wear personal protective equipment to protect your ears, such as ear
protectors.
9. Hand protection. Wear hard gloves – gloves of leather give a good protection.
10. Engine scythe operation. Never work with the cutting tool unprotected. Danger of injury with thrown-
off objects.
11. Remove socket wrench. Before switching the scythe on, remove all the wrenches etc.
12. Be attentive any time. Mind what you are doing. Use common sense. Do not use the scythe when
tired. Never work with the engine scythe when influenced by alcohol, drugs or medicaments affecting
the concentration capability.
13. Fuelling. Always switch the engine off before filling up. Open the tank cap carefully so that any
overpressure may be let out and the fuel does not splash out High temperatures build up on the
machine body when working with the scythe. Therefore, leave the machine to cool down before filling
up the fuel. Otherwise, the fuel could ignite spontaneously and there is a risk of personal burns.
Replenishing the fuel, mind not to overfill the tank. If the fuel drips off, it should be removed
immediately and the machine cleaned. When the filling is completed, check the screw After filling up,
check screw closure for the firm fit to prevent loosening at work because of vibrations.
14. Time of Use and Breaks for Rest . After using the power machine for a longer time, you may have
troubles with the capillary return in hands. However, you may prolong the time of use when wearing
suitable gloves and taking regular breaks. Remember that the time of using the power machine may
get shorter in result of personal inclination to poor capillary return, low outside temperature or strong
contact force of the machine while working
15. Watch out for any damaged parts. Inspect the machine before use. Are any parts damaged? Ask
yourself seriously when detecting slight damage whether the machine will work perfectly and safely despite
that. Watch out for proper aligning and adjustment of any moving parts. Do the parts fit one in another
properly? Are the part damaged? Is everything installed as appropriate? Are any other prerequisites of
proper working in place? Damaged protective devices etc. must be repaired or replaced by authorised
entities unless the operation manual expressly say otherwise. Any defective switches must be replaced at
an authorised servicing centre. Do not use the machine if it cannot be put on and off with the switch.
When repairs are necessary, kindly turn to your local servicing centre.
15. Always put the engine off prior to any adjustment or maintenance of the machine. The same applies to
any works on the mowing head.
16. Use approved parts only. Use only identical spare parts for maintenance and repairs. Request advice
of an authorised servicing centre for this purpose.
Warning! Use of other mowing head, accessories and superstructure parts that are expressly
recommended may result in a threat to persons and property.
.
The machine should not be used for other than intended purposes. Any deviation from the purpose shall be
considered an unauthorised use. Only the user, and never the manufacturer, shall be held liable for any
material and personal damage resulting from such an unauthorised use.
The manufacturer shall not perform any warranties if the machines manufactured by it are altered or used
in an unauthorised manner and if damage is inflicted in result.
