626577

Gude SET 5 IN 1 94081 Manual

26
Zoom out
Zoom in
Previous page
1/267
Next page
GB
1.1.7 5 in 1 Engine Scythe
Fig. 7
1. Lock screw
2. String protection
3. String coil
1.2 Warranty
Warranty claims according to the warranty certificate attached.
2 General Safety Instructions
Read the instructions for use thoroughly before the initial operation of the machine. If any doubts regarding
the connection and operation arise, consult the manufacturer (servicing department).
Observe the instructions shown below carefully to guarantee the high degree of safety.
Caution!
To be safe at working with this engine scythe, it is required that instructions and information on safety,
installation and operation contained in the manual are precisely observed. Any person engaged in the
operation or maintenance of the machine should be knowledgeable regarding the operation manual and
aware of any potential risk. Prevent children, the sick and infirm from access. While you are in the working
area, look after the children very carefully. Observe any regional and local safety precautions applicable in
your place. The same applies to any provisions on the safety at work and health protection in the work site.
The manufacturer shall not be held liable if the machines it manufactures are altered in an unauthorised
manner, in result of which damage was inflicted.
Warning! It is necessary to observe the essential safety precautions when using the machine tools. Kindly
follow the tips and instructions in the additional safety precautions.
1. Pay attention to the conditions of the area, which you’re working in. After the engine is started,
the machine will produce poisonous flue gas. The gas may be invisible and odourless. Hence never
work with the machine closed or poorly ventilated areas. Provide for good lighting when cutting.
Provide for stability when working in wet, snow or icy weather conditions on slopes or rough ground.
2. Do not let any unauthorised persons approach the machine. The visitors and viewers, primarily the
children, the ill and infirm persons should not have any access to the working area. Prevent other
persons from any contact with the tools.
3. Make provision for the tools storage. The machines not in current use should be kept in a dry place,
elevated or locked where practicable so that any access to them is prevented.
4. Always use a correct tool for the job to be done. E.g. avoid using small tools and accessories for
work that should be actually done with a heavy tool. Use the tools only for the purposes they were
designed for.
5. Pay attention to adequate clothing. The clothing should fit the purpose and should not put any limits
to you when working. Wear clothing with stiffener protecting against cuts.
6. Use personal protection equipment. Wear safety shoes with steel toes/ steel or rough sole.
25
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude SET 5 IN 1 94081 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude SET 5 IN 1 94081 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info