Manual Gude Pro PRO 560 BS 75410 (page 15 of 59) (English, German, Dutch, French, Italian)

629074

Zoom out

Zoom in

1/59

Stopping the engine

If you want to stop the engine, release the operating lever

(automatic switch-off lever) (12).

WARNING! The knife still rotates for a few seconds after the

engine is switched off. If you want to leave the mower laying

unattended then disconnect the spark plug cap.

Important tips and advice for grass cutting!!!

Under certain conditions, e.g. when the grass is very high, it

may be necessary to set a bigger cutting height so that effort

for pushing the mower is reduced, engine overloading

removed and blocking of grass in the mower prevented. It is

possible that you will also have to reduce the mower travel

speed and/or cut the area again.

Vent ports in the grass catcher may get blocked if the catcher

is not cleaned regularly. Clean the grass catcher regularly with

water and let it dry before use.

Keep the upper part of the engine at the starter clean. Air flow

will be improved.

Cut in dry weather only.

Keep the knives sharp at all times.

Maintenance

Original spare parts are supplied by the customer service

centre and dealers. An authorised service centre is

recommended to be entitled to provide yearly maintenance

and check of safety elements. For maintenance and spare

parts, please contact your dealer.

IMPORTANT – Regular maintenance is necessary for

constant operational reliability and keeping the original

appliance output at the same level. Keep all screws and nuts

tightened so that you are sure the appliance is in an operation-

reliable condition. Regular maintenance is necessary for safety

and trouble-free operation.

Never store the appliance with fuel in closed rooms as the

evaporating fuel may ignite.

It is necessary to let the appliance cool down and empty the

fuel before storing in closed rooms.

To minimise the risk of fire, keep the engine and muffler

and the fuel tank clean and with no grass, leaves and fats.

Do not store the grass cut with the mower.

For safety reasons, avoid using an appliance with a worn

or damaged parts. Replace any faulty parts with new ones,

do not repair them. Use original spare parts and original

spare knives only.

Parts with quality different from the specified quality may

damage the appliance and put you at risk.

If it is necessary to empty the fuel tank, do so outside with the

engine being cold.

Wear solid protective gloves when assembling and adjusting

the knives.

Check the correct direction of rotating and balance of knives

after they are sharpened.

Check regularly the wear and pollution of the self-closing cover

and grass catcher.

When transporting the appliance is necessary, carry it in

hands or incline it and wear safety gloves at all times.

At all times, hold the appliance where safe holding may be

guaranteed. Consider the weight and distribution of the

appliance.

Cleaning

Clean the appliance with water, remove the grass and mud from

inside every time the appliance is to be used – it will prevent dirt

from becoming dry and problems when started the next time.

Painting inside the housing may wear down in course of time.

To prevent later corrosion of the appliance, use anti-corrosive

paint for the worn-down spots.

Once or twice a year, remove the gearbox cover and clean the

space around belt pulleys and drive belts with a brush or

compressed air.

Once per season, you should clean the inside of the drive

wheels. Disassemble both wheels. Clean the cog wheels and

their edges off the grass and other dirt with compressed air or a

brush.

Knife disassembly

For purposes of cleaning/sharpening/change

Caution!!! It is necessary to disconnect the spark plug before

disassembling.

Release the screw when disassembling the knives.

Re-assemble according to the picture. Tighten the screws. Torsion

moment of 40 Nm. You should also replace the screw when

replacing the knives.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro PRO 560 BS 75410 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude Pro PRO 560 BS 75410 Manual

Product: