629068
15
Zoom out
Zoom in
Previous page
1/82
Next page
Cleaning
Keep the protective equipment, ventilation slots and
engine covers with no dust and dirt if possible. Wipe
the appliance with a dry cloth or blow it with
compressed air at low pressure.
The appliance is recommended to be cleaned
immediately after being used.
Clean the appliance regularly with a wet cloth and a
bit of soft soap. Do not use any cleaners and solvents
as they could damage the plastic parts of the
appliance. Make sure no water gets in the inside of
the appliance.
Carbon brushes
Have the carbon brushes checked by an electrician when
sparks are produced excessively.
Caution! Carbon brushes may only be replaced by an
electrician.
Servicing
There are no other parts inside the appliance requiring
servicing.
Transport
The appliance must cool down before being transported.
Troubleshooting
The table shows possible failures, their causes and
remedy options. If the problem still cannot be removed,
contact a professional to help you.
Switch the appliance off and unplug it before any
servicing and cleaning.
Risk of electric shock.
Troubleshooting table
Symptoms Possible cause
Remedy
Saw blade is
broken
Saw blade is too thin for
the processed material
Too much pressure on the
saw blade
Saw blade is too
stretched
Curve cut is too narrow
Fit a thicker saw
blade
Move the
workpiece
continuously with
even, however,
not too much
pressure on the
saw blade. Let
the saw work by
itself.
Reduce the saw
blade tension
Bigger radius or
narrower saw
blade
Saw blade is
not cutting
straight, it is
turned
Saw blade is too loose
Saw blade has been
subject to too intensive
side loading
Saw blade getting
warm/workpiece is too
thick.
Increase the saw
blade tension
Replace the saw
blade
Use a straight
saw or thinner
material
Engine
slowing
down and
remaining
standing
Saw has been overloaded
by the workpiece
Saw blade is worn out
Chippings have blocked
the exhaust flue
Opt for higher
revolutions; do
not apply too
much pressure
on the saw blade
Replace the saw
blade
Remove any
chippings from
the cover.
Connect the
exhaust
equipment or
increase the
exhaust
equipment output
Dust
accumulatin
g in the
appliance
Produced as a result of
standard work
Clean the
appliance at
regular intervals
Laser or
LED lamp
not working
Laser or LED lamp are
defective
Replace the laser
or LED lamp
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude Pro GDS 16 PRO 55097 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro GDS 16 PRO 55097 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info