629068
13
Zoom out
Zoom in
Previous page
1/82
Next page
LED lamp operation
Switch the appliance on (pic. E/14) as specified under
Switching on/off.
The LED lamp (pic. A/9) can now be turned on/off
using the switch (pic. E/17).
Laser operation
Switch the appliance on (pic. E/14) as specified under
Switching on/off.
Laser (pic. H/24) can now be turned on/off using the
switch (pic. E/16).
Release the saw blade cover (pic. A/2). Fold the saw
blade cover backwards.
Use the laser adjusting screw (pic. H/23) to adjust the
laser line projected on the workpiece. For that
purpose, loosen the laser adjusting screw (pic. H/23)
and adjust the laser (pic. H/24) accordingly. Retighten
the laser adjusting screw (pic. H/23).
Caution: Laser line to be adjusted using the laser
adjusting screw (pic. H/23) only, not using the laser!
Risk of injury by the moving saw blade,
Blowing equipment/exhaust – pic. F
Adjust the blowing equipment hose in a way it
constantly blows the cutting area.
In addition, a vacuum can be connected to the dust
extractor adapter.
Fitting the saw blades – pic. F
Unnecessary saw blades can be stored in the saw blade
storing area (pic. F/8). Open and close the saw blade
storing area as shown in picture F.
Marking
Product safety:
Product corresponds to
applicable EU standards
Prohibitions:
No pulling the plug!
Protect against rain and
moisture!
No touching inside
Warning:
Warning/Caution
Warning against dangerous
voltage
Warning against hand injury
Warning against laser
beam
Commands:
Read carefully the Operating
Instructions. Learn carefully
how the appliance is used
before using it.
Wear headphones and
protective glasses
Pull the plug out before
opening.
Environment protection:
Dispose waste professionally
so as not harm the
environment.
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Any defective and/or disposed
electric or electronic devices
must be delivered to
respective collection centres.
Package:
Protect against moisture This side up
Interseroh-Recycling
Technical specifications:
Connection Weight
Engine output Cutting power 90°:
Revolutions: Cutting power 45°:
Saw blade dimensions Noise:
Other:
Laser function
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude Pro GDS 16 PRO 55097 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro GDS 16 PRO 55097 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info