Manual Gude P 2500 94131 (page 14 of 82) (English, German, Dutch, French, Italian)

624567

Zoom out

Zoom in

1/82

Assembly

The saw-chain grinding machine is delivered pre-assembled. One part consists

of the base, on which the chain guide is located. The other part is a bearing arm

with the motor and handgrip.

The assembly shall be performed with the machine unplugged!

The machine design provides either for a desk installation or wall mounting.

When installing it on the desk, put the machine on the edge of the desk to the

stop (Fig. 1) and screw it to the desk using the holes in the base.

When mounting on the wall, use the respective holes in the vertical part of the

base (here, a distance from the wall should be kept or spacers should be used

for the access to the rear set screw to be preserved).

After the desk top installation, fit the arm in the base inserting the pilot pin and

securing it with a hexagonal screw (Fig.2)

Now, it is possible to fit a washer on the rear side screw and screw the setting

and screw the setting wheel on. (Fig. 3).

Screw the supporting arm control holder on the screw in the grinding disk body

(Fig.4)

Fit the grinding disk enclosure on using the supplied screws and a respective

wrench (Fig. 5).

Tip:

When mounting on the wall, take care to mount the machine at a height of

120 – 130 cm from the floor to avoid working at eye height!

To be able to install the disk, it is necessary to unscrew the auxiliary flange (Fig.

6).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude P 2500 94131 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude P 2500 94131 Manual

Product: