623578

Gude MBS 125V 40543 Manual

7
Zoom out
Zoom in
Previous page
1/44
Next page
Introduction
To enjoy your new machine as long as possible, please read
carefully the Operating Instructions and the attached safety
instructions before using it. Further, we recommend keeping the
Operating Instructions to recall the product features in the
future.
Within the continuous product development, we reserve
the right to make technical changes to improve it.
Any reprints, even partial, are subject to approval.
This document represents translation of the original
Operating Instructions.
Supply includes
Take the device out of the transport container and check if the
following parts are included:
MBS 125 V metal-cutting band saw
Length stop
Length stop guide rail
Please contact your seller if any parts are missing or are
damaged.
Technical specifications
MBS 125 V metal-cutting band saw #40543
Voltage/frequency: 230 V~50 Hz
Engine power: 400 W (S6 30%)
Protection type: IP 20
Engine speed: 2,000 – 4,200 per min
-1
Saw band: 1,435 x 12.7 x 0.65
Saw band teeth: 8 / 12 teeth per inch
Cutting power at square material: 90° 127 x 125 mm
45° 80 x 100 mm
Cutting power at circular material: 90° 125 mm
45° 76 mm
Device head cut range: 0 – 60°
Speed: 38 – 80 m per min
Noise: L
WA
90 dB (A)
Installation dimensions (L x W x H): 700 x 320 x 420
Weight gross / net: 24 / 26 kg
Use as designated
The band saw has been designed for cutting metal, cast iron
and plastic materials. You must not cut wood with the band saw.
The shape of the material being cut must be such that it may be
safely clamped in the machine vice and that it prevents the
material being cut from springing out.
The machine cannot be used for works other than for which the
machine has been designed and that are specified in the
Operating Instructions.
Any other use is a use in conflict with the designation. The
manufacturer will not be liable for any consequential damage
and injuries. Please be sure to know that the machine has not
been designed for industrial purposes.
Operator requirements
The operator must carefully read the Operating Instructions
before using the machine.
Qualification
No special qualification is necessary for using the machine
apart from detailed instruction by an expert.
Minimum age
The machine can only be operated by persons over 18 years of
age. An exception includes youngsters operating the machine
within their professional education to achieve necessary skills
under trainer's supervision.
Training
Using the machine only requires appropriate instructions by a
professional or reading the Operating Instructions. No special
training necessary.
General safety instructions
Read carefully these Operating Instructions. Familiarise with the
controls and proper use of the machine. Keep the Operating
Instructions for future reference. The warning plates and labels
with instructions attached to the machine provide important
information on safe operation.
Safe work
Use the machine only on a connection with a safety switch
against stray current of 30mA (RCD).
Keep the place of your work clean!
Any mess in the place of your work may result in injuries.
Consider the environment influences!
Do not expose the machine to rain.
Do not use the machine in a moist or wet environment.
Provide adequate lighting.
Do not use the machine near flammable liquids or gases.
Keep other persons in a safe distance!
Do not let other persons, especially children, touch the machine
and the cable. Keep them in a sufficient distance from the place of
your work.
Provide adequate clothing.
Do not wear any loose clothing and jewels. They could get caught
by the moving parts of the machine. Further, we recommend
wearing safety shoes, protective glasses and ear protectors when
working with the machine. Long hair must be adequately
protected.
Store the machine properly!
Machines not being used must be kept in a dry and locked place,
inaccessible to children.
Do not overload the machine!
Work within the specified power range.
Use the right machine!
Do not use the machine for purposes for which it has not been
designed.
Take care of your machine!
Comply with the servicing regulations and instructions.
At regular intervals, check the machine cable and have it replaced
by an authorised professional if damaged.
At regular intervals, check the extension cable and replace it if
damaged. Keep the handles dry, with no oil and grease.
Be careful!
Pay attention to what you are doing. Work reasonably. Do not use
the machine when you are tired.
WARNING!
Using any other accessory equipment may represent a risk of a
serious injury for you.
Watch out for the feeder cable. Do not pull the cable. Do not
use it to pull the plug out. Keep the cable out of reach of thermal
sources, oil and sharp edges.
Have your machine repaired by an expert only!
This machine meets the applicable safety provisions. Any repairs
may only be executed by an expert, using original spare parts;
otherwise, the user could face a risk of injury.
Children and persons not familiarised with the machine and
persons with limited physical, sensory and mental skills must not
use the machine.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude MBS 125V 40543 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude MBS 125V 40543 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info