Manual Gude KS 66-1600 L 58124 (page 24 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Turkish)

624907

Zoom out

Zoom in

1/80

ENGLISH

Any damaged or disposed electric or

electronic devices must be delivered to

appropriate collection centres.

typelabels - warnings - branding - positions

CUT CONTOUR:

!!! all stickers are shown in original size !!!

STRUCTURE OF THE SERIAL - CURRENT PRODUCTION

Don´t print!

Just for example!

Güde GmbH & Co. KG - Birkichstraße 6 - D-74549 Wolpertshausen - Deutschland

CURRENT PRODUCTION YEAR

Attention! The current production year is part on our

typelabels. It`s strictly required to update this part of

the typelabel and insert the correct current

production year.

Güde GmbH & Co. KG

Birkichstrasse 6 • D-74549 Wolpertshausen

Baujahr:

2015

Artikelnummer: XXXXX

Seriennummer: XXXXX-XXXX-XXXX

STRUCTURE OF THE SERIAL

xxxxx - xxxx - xxxx

Ordernumber Shippingdate (YYMM) Counter

PRINT ON WHITE COLORED MATERIAL

USE STRONG PLASTIC MATERIAL, RESISTANT AGAINST DELAMINATION

item-nr: 58124

PRINT ON WHITE COLORED MATERIAL

USE STRONG PLASTIC MATERIAL, RESISTANT AGAINST DELAMINATION

Attention

Cut Contour!!!

LEFT

RIGHT

LASER

INJECTION LOGO

Attention

Cut Contour!!!

• 230 V ~ 50 Hz

• 1600 W

• Ø 190 mm x 20 mm

• max. 64 mm

• 5000 min

-1

KS 66-1600 L

Ser.-Nr.: xxxxx-xxxx-xxxx

GTIN: 4015671508201

Baujahr: 2015

Art.Nr.: 58124

made in

P.R. China

Güde GmbH & Co. KG • Birkichstrasse 6

74549 Wolpertshausen • Deutschland

EN 60825-1:2007

650nm

P < =1 mW

This product corresponds

to the laser class 2 in

accordance with EN

60825-1:2007

P< 1 mW / λ = 650nm

Do not stare into beam.

WARNING Read all safety warnings and all

instructions. Failure to follow the warningsand

instructions may result in electric shock, re and/or

serious injury.

Save all warnings and instructions for future

reference.

Safety instructions for manual

circular saws

Cutting procedures

DANGER: Keep hands away from cutting

area and the blade. Keep yoursecond hand on

auxiliary handle, or motor housing. If both hands

are holding thesaw, they cannot be cut by the blade.

b) Do not reach underneath the workpiece. The

guard cannot protect you from theblade below the

workpiece.

c) Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth ofthe blade teeth

should be visible below the workpiece.

d) Never hold piece being cut in your hands or

across your leg. Secure theworkpiece to a stable

platform. It is important to support the work proper

ly tominimize body exposure, blade binding, or loss

of con

trol.

e) Hold the power tool by insulated gripping

surfaces only, when performing an operation

where the cutting tool may contact hidden wiring

or its own cord. Contact with a „live“ wire will also

make exposed metal parts of the power tool „live“ and

could give the operator an electric shock.

f) When ripping, always use a rip fence or straight

edge guide. This improves theaccuracy of cut and

reduces the chance of blade binding.

g) Always use blades with correct size and shape

(diamond versus round) of arbourholes. Blades

that do not match the mounting hardware of the saw

will runeccentrically, causing loss of control.

h) Never use damaged or incorrect blade washers

or bolt. The blade washers and boltwere specially

designed for your saw, for optimum performance and

safety ofoperation.

Kickback causes and related warnings

– kickback is a sudden reaction to a pinched, bound

or misaligned saw blade, causing anuncontrolled

saw to lift up and out of the workpiece toward the

operator;

– when the blade is pinched or bound tightly by the

kerf closing down, the blade stallsand the motor

reaction drives the unit rapidly back toward the

operator;

– if the blade becomes twisted or misaligned in the

cut, the teeth at the back edge of theblade can dig

into the top surface of the wood causing the blade

to climb out of thekerf and jump back toward the

operator.

Kickback is the result of saw misuse and/or incorrect

operating procedures or conditions andcan be avo

ided by taking proper precautions as given below.

Maintain a rm grip with both hands on the

saw and position your arms to resistkickback

forces.Position your body to either side of the

blade, but not in line withthe blade. Kickback

could cause the saw to jump backwards, but kickback

forces can becontrolled by the operator, if proper

precautions are taken.

b) When blade is binding, or when interrupting

a cut for any reason, release the triggerand

hold the saw motionless in the material until the

blade comes to a completestop.Never attempt

to remove the saw from the work or pull the saw

backward whilethe blade is in motion or kickback

may occur. Investigate and take corrective actions

toeliminate the cause of blade binding.

c) When restarting a saw in the workpiece, centre

the saw blade in the kerf and checkthat saw teeth

are not engaged into the material. If saw blade is

binding, it may walk upor kickback from the workpiece

as the saw is restarted.

d) Support large panels to minimise the risk of

blade pinching and kickback. Largepanels tend to

sag under their own weight.Supports must be placed

under the panel onboth sides, near the line of cut

and near the edge of the panel.

e) Do not use dull or damaged blades. Unsharpen

ed or improperly set blades producenarrow kerf cau-

sing excessive friction, blade binding and kickback.

Blade depth and bevel adjusting locking levers

must be tight and secure beforemaking cut. If

blade adjustment shifts while cutting, it may cause

binding and kickback.

g) Use extra caution when sawing into existing

walls or other blind areas. Theprotruding blade

may cut objects that can cause kickback.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude KS 66-1600 L 58124 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Turkish as an attachment in your email.

The manual is 3,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude KS 66-1600 L 58124 Manual

Product: