628857

Gude GT 4200 Z 17304 Manual

9
Zoom out
Zoom in
Previous page
1/56
Next page
Instructions for installation and first putting the
appliance into operation
Never use the appliance near flames, sparks and
flammable substances.
MINIMUM DISTANCE OF 2 M TO BE NECESSARILY
KEPT!!!
Fitting the appliance to the gas bottle (pic. 2-5)
Step 1
Make sure all components are standing safely. Make sure
the socket heater, gas hose and gas bottle are safe.
Step 2
To fix the stand (3) on the bottle, use the clamping screw
(4).
Step 3
Screw the pressure controller (11) and the gas hose (10)
on the gas bottle valve.
Step 4
Use the wing nut (8) and the toothed disk (9) to put the
heater to the required position and fix it on the stand (3).
Step 5
Screw the other end of the gas hose (10) to the safety
valve (7).
Step 6
Make sure all the screwing is tight.
Before putting the appliance into operation, check
necessarily the screw caps for any gas leak using a
leak detection spray or lye soap. Retighten them if
necessary.
Putting the appliance into operation
Step 1
Put the assembled appliance to a level and stable position.
Step 2
Open the valve on the gas bottle. Make sure the gas line
and the screwings are gas tight and there is no leak.
Step 3
Prepare the spark gun.
Step 4
Press the gas volume controller in the middle. Ignite the
radiant heater immediately using the spark gun (risk of
ignition) while the gas volume controller is kept pressed.
To ignite the gas-air mixture, the gas volume controller
must be pressed, even several times if necessary.
Step 5
After igniting the gas-air mixture, keep the gas volume
controller pressed for app. 10 to 20 more seconds. Then
release it slowly and check whether the socket heater is
working continuously.
Step 6
The power may be reduced or increased by turning the
gas volume controller. The adjustment space is limited by
stops.
Before putting the appliance into operation, check
necessarily the screw caps for any gas leak using a
leak detection spray or lye soap. Retighten them if
necessary.
Changing the gas bottle
• Whenever being outdoors alone, keep distance
from the flames or sources of fire and proceed
as follows!
• Close the gas bottle valve.
• Unscrew the pressure reducing valve (11).
• Unscrew the clamping screw (4) and remove the
appliance.
• Find out if there is pressure controller sealing in
place.
• Put the appliance on a new gas bottle and
continue as specified in “Instructions for
installation and putting the appliance into
operation”.
Marking
Product safety:
Product corresponds to
applicable EU standards
Prohibitions:
No fire!
No operation in enclosed
spaces!
No smoking!
Warning:
Warning/Caution
Warning against hot
surface
Bystanders must keep safety
distance
To be used outdoors only
and necessarily protected
against moisture.
Commands:
General command sign
Please read the Operating
Instructions before using
the machine
Secure the gas bottle against
turnover
Environment protection:
Dispose waste professionally
so as not harm the
environment.
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Any defective and/or disposed
electric or electronic devices
must be delivered to
respective collection centres.
Package:
Protect against moisture This side up
Interseroh-Recycling
9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GT 4200 Z 17304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GT 4200 Z 17304 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info