Manual Gude GSX 1100 (page 11 of 37) (English, German, Dutch, French, Italian)

628271

Zoom out

Zoom in

1/37

rinsed with clean water when used in very dirty water. The

switching on and off heights can differ.

Thermal fuse/engine protection circuit-breaker

The drowned pump is equipped with an engine protection

circuit-breaker. If the engine is overheated, the engine

protection circuit-breaker will automatically switch the pump

off. Cooling time is app. 25 minutes, the pump subsequently

switches on. If the engine protection circuit-breaker switches

on, it is absolutely necessary to identify the cause and

remove it (see also the “Failure searching“). The given data

cannot be used for “family style“ repairs as it requires

specific professional knowledge. You must contact the

customer service department at any failures.

Instructions step by step

• Connect the water hose to appropriate pump outlet (see

the Assembly and first putting into operation).

• Fix the rope, chain, etc. to the pump handle and place it

to the right place.

• Put the pump “sideways“ (pic. D) to the pumped

medium. Make sure the floating switch is in the operating

position.

• Plug in the pump.

• Rinse the pump with clean water after work finishing.

Operation

The pump is put into operation when the plug is inserted in

appropriate socket and the floating switch is in the required

position (see the Instructions). If the pump is lifted or

transported, it is done with an assembled handle and not with

the connecting cable. If the pump is being plunged, a rope,

chain, etc. fastened to the handle need to be used if

necessary.

At muddy, sandy or siliceous soil the pump must be hung on

a rope or chain or put on a suitable wide baseplate to be able

to work plunged. Sand and other abrasive solids reduce the

service life of hydraulic parts and seal of the pump and

therefore they need to be prevented. In frost conditions, the

pump must be removed from the pumped liquid. It is

necessary to absolutely make sure the pump is not exposed

to a risk of frost. The pump must be emptied and stored at a

place protected against frost.

Floating switch positions (pic. B + C)

The operating or shutdown point of the pump can be set

with various floating switch positions. In pic. B you can see

the float cable without any fixation change with full switch

radius. The figure 1 is the working position and figure 0 the

shutdown position.

Due to appropriate fixation of the float cable, possible on the

pump handle, the switch radius can be reduced when there is

no sufficient space or at a corresponding level control. The

figure 1 in pic. C is the working position and figure 0 the

shutdown position.

Continuous operation: The floater can be hung to the side

of the pump; in this position (the floater cable points

downward), the pump runs constantly.

Important: In case of continuous operation, under no

circumstances allow the operation of the pump without

fill!

Important: If the pump is to stay out of service for a longer period of time, make sure by all means necessary that both the

pipelines and the pump itself are emptied. Protect the device against frost. The pump can only be stored entirely empty.

Failures – causes - removal

Failures Causes Removal

Engine does not start

No system voltage

Blocked pump wheel

Floating switch in shutdown position

Check the voltage

Inspect the pump wheel for foreign objects

Check the water level (pic. B/C)

Pump does not suck

Pump without water

Water level too low

Blocked pump wheel

Let the air bubbles release (pic. D)

Switch the pump off, water level must go up.

Remove the obstruction

Insufficient amount of

water pumped

Dirty tube filter

Water level quickly going down

Maximum head of delivery exceeded

Transport guide broken

Clean the tube filter

Ensure sufficient inflow

Check the transport path length

Check the transport guide

Thermal detector

switching the pump off

Dirty tube filter

Water temperature too high

Pump running continuously at maximum pressure.

Clean the tube filter and let the pump cool down

Reduce the water temperature

Make more breaks

Inspections and maintenance

Be sent with the exception of cases described below, the pump for repairs required for service.

Safety instructions for inspections and maintenance

It is always necessary to interrupt feeding (plug pulled out of socket) and make sure the pump is not going to start before any pump

maintenance.

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to

unforeseen accidents and injuries.

Inspection and maintenance plan

Time interval Description Any other details

As needed Cleaning and rinsing out Function check of the floating switch (C/D)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GSX 1100 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GSX 1100 Manual

Product: