628947
41
Zoom out
Zoom in
Previous page
1/52
Next page
41
PROBLEM URSACHE LÖSUNG
1. Keine Stromversorgung
1. Überprüfen Sie, ob der Stecker an das
Stromnetz und an den Ofen angeschlossen
ist
2. Stromkabel defekt
2. Ersetzen Sie das Kabel mit einem
gleichwertigen Kabel (Fachmann)
3. Sicherungen durchgebrannt
3. Überprüfen Sie, ob die Sicherung der Platine
durchgebrannt ist.
4. Bedienungsfeld defekt
4. Ersetzen Sie das Bedienungsfeld (nur mit
Originalersatzteilen).
5. Flatkabel defekt
5. Ersetzen Sie das Kabel mit einem
entsprechenden Kabel
„AL 1
(Stromausfall)
Dieser Alarm erscheint
bei Stromausfall
6. Platine defekt 6. Ersetzen Sie die Platine (mit Originalteilen)
1. Abzugsanlage verstopft 1. Kontrollieren und Rauchabzug reinigen
2. Rauchabzug defekt 2. Ersetzen Sie den Motor des Rauchabzugs
3. Dichtung der Türhalterung beschädigt
3. Überprüfen Sie die Dichtungen, ob diese
eventuell zu ersetzen sind.
4. Sehr langes Abzugsrohr
4. Überprüfen Sie, ob der Ofen richtig montiert
wurde.
5. Verbindung gummierte Tür verstopft 5. Gummierte Tür ausbauen und reinigen
6. Verbindungsrohr des Druckmessers verstopft 6. Kontrollieren und, falls nötig, ersetzen
„AL 8
(Überdruck im
Abzugsrohr)
Dieser Alarm erscheint,
wenn ein Überdruck im
Abzugsrohr entsteht.
Das System stoppt
automatisch die
Förderschnecke.
7. Platine defekt 7. Die Platine ersetzen
1. Unreiner Brennstoff 1. Nur qualitativ Hochwertige Pellets verwenden
2. Raumlüfter defekt 2. Lüfter ersetzen
3. Abgasgebläse defekt 3. Lüfter ersetzen
4. Kontakt Sicherheitsthermostat unterbrochen 4. Kontakt prüfen
„AL 7
(Sicherheits-
thermostat)
Dieser Alarm erscheint,
wenn das
Sicherheitsthermostat
eine überhöhte
Temperatur mißt. Der
Ofen geht automatisch
in die Ausschaltphase.
1. Abgasgebläse defekt 1. Lüfter ersetzen
2. Abgasgebläse blockiert 2. ggf. reinigen
„AL 4
(Abgasventilator
defekt)
Dieser Alarm erscheint,
wenn das Abgas-
gebläse defekt ist.
1. Tank leer 1. Pellets nachfüllen
„AL 6
(Pelletstank leer)
Dieser Alarm erscheint,
wenn der Pelletstank
leer ist.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GP 9000 B 68015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GP 9000 B 68015 in the language / languages: German as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info