628947
40
Zoom out
Zoom in
Previous page
1/52
Next page
40
G. DIE HÄUFIGSTEN STÖRUNGEN
ACHTUNG: Alle arbeiten dürfen ausschließlich bei ausgeschaltetem, nicht an das Stromnetz
angeschlossenen Ofen von Fachleuten ausgeführt werden.
PROBLEM URSACHE LÖSUNG
1. Kabelverbindung unterbrochen 1. Verbindung prüfen
2. Kamin verstopft 2. Abzugsrohr reinigen
3. Sonde nicht korrekt plaziert
3. Sonde muß im Absaugrohr ca. 1 cm zu sehen
sein
4. Flatkabel defekt
4. Ersetzen Sie das Kabel mit einem
entsprechenden Kabel
„AL 2
(Rauchtemperatur-
sonde)
Dieser Alarm erscheint
,wenn die
Rauchtemperatursonde
defekt ist ,die
Kabelverbindung zur
Sonde unterbrochen
oder der Kamin
verstopft ist.
1. Rauchabzugsanlage verstopft 1. Die Rauchabzugsanlage reinigen
2. Platine defekt 2. Platine ersetzen
3. Die Kontrollsonde für die Rauchtemperatur ist
defekt
3. Sonde ersetzen
4. Rauchkontrollsonde wurde falsch positioniert
4. Sonde kontrollieren und richtig positionieren
(muss im Abgasrohr 1cm zu sehen sein)
5. Verbindung gummierte Tür verstopft 5. Gummierte Tür ausbauen und reinigen
6. Abgasventilator defekt 6. Abgasventilator ersetzen
„AL 3
(Rauchtemperatur zu
hoch)
Dieser Alarm erscheint,
wenn die Rauchsonde
eine Temperatur von
über 280° mißt. Bei
diesem Alarm geht der
Ofen automatisch in die
Ausschaltphase.
1. Brennstoffbehälter leer 1. Den Behälter auffüllen
2. Der Feuerrost wurde nicht gereinigt 2. Den Feuerrost reinigen
3. Die Betriebstemperatur wird nicht erreicht 3. Den Feuerrost leeren und richtig positionieren
4. Zündung defekt 4. Den Widerstand austauschen
„AL 5
(Keine Zündung)
Dieser Alarm erscheint
bei fehlgeschlagener
Zündung, der Ofen geht
sofort in die
Ausschaltphase.
5. Platine defekt 5. Platine ersetzen
1. Unreine Pellets 1. Nur qualitativ Hochwertige Pellets verwenden
2. Feuchte Pellets 2. Nur trockenen Brennstoff verwenden
3. Platine defekt 3. Platine ersetzen
„AL 6
(Ausschalten
während der Arbeits-
phase)
Dieser Alarm erscheint,
wenn das
Feuer während der
Arbeitsphase
erlischt und die
Rauchtemperatur unter
die Mindestgrenze fällt.
Der Ofen geht ebenfalls
in die Ausschaltphase.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GP 9000 B 68015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GP 9000 B 68015 in the language / languages: German as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info