Manual Gude GMH 2000 55008 (page 28 of 108) (English, German, Dutch, French, Italian)

624770

Zoom out

Zoom in

1/108

Protect against humidity

This side up

Safety Instructions

WARNING!

When using electric tools the following general sa-

fety instructions must be obeyed to protect yourself

from electric shocks, injury and re risks.

Read all these instructions before using this electric

tool and keep the safety instruction in a safe place.

Keep your work area clean and tidy. Untidy work

places and workbenches increase the risk of accidents

and injur

ies.

Do not expose the appliance to rain and do not

use it in wet or moisture conditions.

Provide adequate lighting or good lighting condi-

tions when working with the machine.

o not work with electric tools in conditions with

ammable liquids, gases or dust. Electric tools produ-

ce sparks able to ignite dust or fumes.

rotect yourself from electric shock.

Avoid body contact with earthed objects (for example

pipes

, radiators, electric stoves and cooling units). There

is an increased risk of electric shock if your body is

earthed.

Keep children and bystanders away while ope-

rating a power tool. Do not touch the electric tool

or the cable

. When not concentrated, you may lose

control over the machine.

Ensure that you store electric tools in a safe place.

Tools which are not in used must be stored in a dry

place as high as possible out of the reach of children

or in an inaccessible place.

Do not overload the machine. Use appropriate

electric tools for your work. Working with appro-

priate electric tools is better and safer when within

the sp

ecied power range. They will work better

and more safely in the specied power range.

Do not use the electric tool for purposes for which

it is not designed. For example, do not use a manual

circular saw for cutting branches or logs.

Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothingand gloves away from

ving parts. We recommend that you wear non-slip

shoes when working outdoors. Wear a hairnet if you

have long hair.

Use protective equipment which t you. Wear

safety goggles and ear protection at all times. A dust

mask or respirator is also required. Wear tight-tting

gloves at all times when handling sharp blades and

saw blades,

If dust exhausters and catchers are to be installed,

make sure they are tted and used properly. Using

a dust exhauster may reduce the exposure to dust.

Do not use the cable in conict with its designa

tion, to carry or hang electric tools or to pull the

plug out of so

cket. Protect the cable against high

temperatures, oil, sharp edges or moving parts of

the machine. Damaged or entangled cables increase

the risk of electric shock.

Secure the workpiece. Use clamping equipment

or a vice to secure the workpiece. This will be safer

than holding it in your hand.

Avoid any abnormal body posture. Provide good

stability and keep balance at all times. By this,

electric tools are better controlled in unexpected

situations.

Treat electric tools carefully. Check whether the

moving parts work perfectly and do not drag,

whether not broken or damaged to such an extent

that functioning of electric tools could be aected.

Have any damaged parts repaired before using the

machine. Poor maintenance of electric tools is a

cause of many injuries.

Keep the cutting tools sharp and clean. Carefully

treated cutting tools with sharp edges get stuck less

often and are easier to guide.

Follow the instructions for lubricating and chan

ging tools.

heck the connection cable on the electric tool at

regular intervals and have it replaced by an expert

if it is damaged.

Check the extension cables at regular intervals and

replace them if they are damaged.

Keep the handles dry, clean and free of oil and

grease.

Pull the plug out of the socket and/or remove the

battery when the tool is not in use before you

make machine settings or change accessories,

such as the saw blade, drill bit or cutter. This safety

measure prevents unintentional starting of the

electric tool.

Before starting any electric tool, remove any

adjusting wrenches and screwdrivers. A tool or a

wrench present in the rotating part of the machine

may lead to injuries.

Prevent the machine from unintentional starting.

Before plugging and/or connecting the machine

to battery, handling or carrying, make sure the

electric tools are switched o. Having a nger on

the switch when carrying the electric tool or when the

machine is on when plugging it may lead to injuries.

If you wish to work outdoors with an electric tool,

only use extension cables which are approved for

outdoor use and are marked accordingly. Using an

extension cable suitable for outdoor use reduces the

risk of electric shock.

Be careful, pay attention to what you are doing

and use common sense when working with

electric tools. Do not use electric tools when you

are tired or under the inuence of drugs, alcohol

or pharmaceuticals. A moment if inattention when

using electric tools may lead to serious injuries.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GMH 2000 55008 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GMH 2000 55008 Manual

Product: