624565

Gude GKS 108 94077 Manual

17
Zoom out
Zoom in
Previous page
1/120
Next page
Fig. 9
If you have sharpened your chain, check the depth delimiters
distance.
The depth delimiters (2) should always be lower than the cutting links.
(1). Where necessary, you should make the delimiters (2) shorter with
a saw file (not included in the scope of delivery) following your chain
data.
Training
Read the operating and maintenance instructions carefully. Make yourself thoroughly familiar with the control devices and the proper
use of the device. You need to know how the device works, and how the control equipment can be turned off quickly. Never let
children operate the device. Never allow adults without proper training to work with the device. Keep the work area free of any person
especially young children, and pets. Be careful to avoid that you slip or fall.
Step-by-Step Instructions
Put the chain in a clamping device.
Set the sharpening angle.
Set the links and depth delimiters spaces.
Clam the chain, using the respective device.
Switch the unit on.
Lower the unit head and grind the tooth slowly.
Release the chain and get ahead two teeth further using the stop (differ between the right and the left teeth, all the teeth on a
side should be sharpened at first)
Repeat the steps so that each teeth is sharpened (to work the teeth on the opposite side, the sharpener head has to be set at
the equal angle on the opposite side; see also Fig. 4)
Störungen - Ursachen - Behebung
Unplug before performing any work on the unit power cord from the socket.
Trouble Cause Troubleshooting
The grinding spot is
burnt
1. The grinding disc is blunt 1. Align the disc.
The sharpening angle
does not fit
1. The grinding disc is worn 1. Replace the disc.
Inspections and Maintenance Safety Instructions
The machine will serve as a sufficient aid only if maintained and care for appropriately. Insufficient maintenance and care may result
in accidents and injuries.
The disc is not allowed to be fitted on the head with force.
The grinding disc bored centre hole diameter shall not be altered.
Only grinding discs fit for the unit are allowed for the use.
Any works in the unit should be done with the unit switched off.
Inspections and Maintenance
Fig. 10
Take steps as shown to replace the grinding disc .
Take the cover off
Loosen the disc locking screw
Take the disc out.
Take the steps in reverse order to fit the grinding disc in
Use only the disc fitted for the use in this unit.
17
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GKS 108 94077 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GKS 108 94077 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info