624565

Gude GKS 108 94077 Manual

12
Zoom out
Zoom in
Previous page
1/120
Next page
3. Keep away from children
Do not let other people touch the unit or cable. Keep them out of the workplace.
4. Do not overload your unit
Your work is safer and better if kept within the stated range of capacity.
5. Use a correct tool
Do not use low-capacity machines or additional tools for hard works. Do not use for any works it has not been designed for.
6. Wear appropriate work clothing
Avoid wearing loose-fitting clothes or jewels that could be caught by rotating parts. If your hair is long, always wear a hairnet.
7. Use goggles
Always work wearing goggles to be protected against eyes injury.
8. Secure the piece worked
Use clamping fixtures to hold the piece.
9. Take proper care of the unit
Keep it sharp and clean so that work is better and safer. Follow maintenance regulations contained in the operating manual.
Check the plug and cable regularly and have them replaced by a professional if damaged. Keep the handles free of any oil and
grease.
10. Unplug the unit
Unplug the unit before getting down to any repairs or replacement of accessories or if it is to be out of use for some time.
11. Do not leave any wrenches, spanners and adjustment tools in the unit.
Check the unit before every switching on to make sure that the wrenches and adjustment tools have been removed.
12. Make provisions preventing unintentional switching on. Always pay attention to the machine having been put off by the
switches before you plug in.
13. When working outdoor, use special extension cables. For the use outdoor, you will need special extension cables fitting the
purpose and marked in an appropriate way.
14. Be attentive any time.
Mind what you are doing. Use common sense. Do not use the unit when tired.
15. Use of stare parts
Use only the spare parts expressly required or recommend by the manufacture. Use of other parts may result in a risk for the
user.
16. Make sure that the speed shown on the grinding tool are the same or higher than those shown as rated speed of the unit.
17. Make sure that the grinding tool size matches the unit.
18. Grinding discs require careful storage and handing.
19. The sharpeners have to be attached according to the data in the instruction manual.
20. With the tool newly fitted, let it run idle for about 30 sec. Mind the vibration possibly arising and if they are heavy, switch the unit
off. Check for the reason, remove it and re-test before using the unit again.
21. If protection devices are supplied with unit, the unit is allowed for use with the devices only.
22. Do not use other than prescribed grinding tool, not even with reducers or adaptors.
Behaviour in case of emergency
Apply the first aid adequate to the injury and get qualified medical assistance as quickly as possible. Protect the injured person from
more accidents and calm him/her down.
For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is
essential to replace any used material in the first-aid kit immediately after it has been used. If you seek help, state the
following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Sings on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual and/or on the unit:
Product Safety:
Product compliance
with respective EU
standards
Protection insulation
Bans:
General ban
(combined with
another pictograph
Do not reach in
rotating parts
Do not use the unit
in rain
Keep out of reach of
children
Don´t pull the cable
12
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GKS 108 94077 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GKS 108 94077 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info