622222

Gude GE 185 F - 20004 Manual

13
Zoom out
Zoom in
Previous page
1/80
Next page
5. Human factor negligence:
• Negligent use of personal protection equipment:
Welding without use of required protection
equipment is hazardous for health.
Always use suitable protection aid for welding.
Transport und Lagerung
When storing, it is necessary that the appliance is
put to a dry place, inaccessible to children and
unauthorised persons.
Clean the appliance thoroughly before longer
putting out of operation. The unit should be stored
at a dry place inaccessible to unauthorised
persons. Make sure that it is unplugged. Remember
that also the electrodes should be stored at a dry
place.
Inspections and Maintenance
Only a unit maintained and cared for on a regular basis may
be a serviceable aid. Insufficient maintenance and care may
result in emergencies and unforeseen accidents.
Before every start of work:
• Check the unit function. Do not work with a defective
unit.
• Check the cable for damage and replace it with a cable
of the same quality if necessary.
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless bureaucracy
at our webpage www.guede.com in the Services section.
Please help us be able to assist you. To identify your machine
when claimed, we need to know its serial No., order No, and
year of production. All these details can be found on the type
label. Enter the details below for future reference.
Serial No.
Order No.
Year of production:
Tel. +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
Email: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
Trouble - Causes - Troubleshooting
Trouble Cause Troubleshooting
Fuse activated
1. Welding current too high for the fuse.
2. defect
1. Use a fuse of other switching-on characteristics.
2. Have it repaired
Even welding impossible
1. Poor earthing contact on the cable /tongs 1. Clean the piece and provide for good contact
2. Check and replace the cable if necessary.
Fragile or porous weld
1. Unclean piece
2. wrong type of electrode chosen
3. Electrodes are damp
1. Remove rust, grease and other dirt before welding.
2. Select the electrodes according to the material to
be welded.
3. Dry the electrodes or dispose of them
Welding current not
available
1. Reverse conduct of the welding current .doe
not provide right contact Thermal protection
light on
2. Defective electronics
1. Check the reverse line of welding current for good
contact
2. Let the unit cool down. The work may be
continued when the light indicator goes off.
3. Inform servicing department
Heat protection on
permanently
1. Ambient temperature too high
2. For the given welding unit too small
Check and Maintenance Schedule
Time Interval Description Other Details
Before each start of work
• Check the unit for correct function. Never work with defective unit.
• Check the cable for damage. Replace it with a new one of same quality if
necessary.
13
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GE 185 F - 20004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GE 185 F - 20004 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info