622222

Gude GE 185 F - 20004 Manual

11
Zoom out
Zoom in
Previous page
1/80
Next page
Cuation: The indicators will light at overloading only.
Thermal protection is provide on the unit to switch off the
welding current supply automatically as soon as the inner
temperature. As it drops to a value of correct operation, the
unit switches on again.
Step-by-step Instructions
The welding area should be free of any rust and varnish. The
electrode is selected by the type of material. It is
recommended to test the electrode and the current intensity
on scrap at the beginning. Place the electrode ca 2 cm above
the starting point. Always use a welding shield, welder’s
gloves and protective clothing. Touch the piece and slightly
pull the electrode.
Wrong
(arc too long)
Correct
(ca 1 – 1.5 multiple of the
electrode diameter)
Precise length of the arc is critical as the current and voltage
intensity varies. Poor intensity of current makes both the weld
and resistance worse. The electrode angle support should be
70-80 degree forward with regard to the piece worked. Too
big angle makes the slag slide under the edging material. If
the angle is too small, the arc will fluctuate and splash. In
either of the cases the wells is porous and weakened
Wrong
Wrong
Correct
The slag should not be removed before the weld gets cooled.
Continue welding of an interrupted weld after the slag is
removed.
Wrong
Correct
The welder should try to keep the arc length constant. As the
electrode gets worn, it should typically get nearer. It is
recommended to remove the electrode in the direction of the
weld to avoid forming a porous crater.
Signs on Unit
Meaning of symbols
Following symbols are used in this instruction/on the unit:
Product safety:
Product corresponds to
applicable EU standards
Attention!
Before handling, read the
operating instructions!
Prohibitions:
General ban combined with
another pictograph!
No pulling he cable!
Do not use in rain!
Warning:
Warning/Caution
Warning against dangerous
voltage
Commands:
Read operating manual
before use
Safety gloves to be used!
Wear protection shoes Welding helmet to be used
Wear protection clothing Unplug before opening
Environment protection:
Dispose waste
professionally so as not
harm the environment.
Packing cardboard material
may be delivered to collecting
centres for recycling.
Any defective and/or
disposed electric or
electronic devices must be
delivered to respective
collection centres.
Interseroh-Recycling system
with serial number
Package:
Protect against moisture!
Caution – Fragile!
This side up!
Technical specifications:
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GE 185 F - 20004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GE 185 F - 20004 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info