Manual Gude GD 50 IK 85111 (page 15 of 56) (English, German, Dutch, French, Italian)

628870

Zoom out

Zoom in

1/56

Make sure the tank lid has been closed safely before lifting

or transferring the appliance.

The appliance can easily be transferred by the handle and

drawn forward.

Troubleshooting

Failure Possible

cause

Removal

Fan not

starting and

flame not

beginning to

burn.

1. No power

supply

2. Engine

winding is

burnt out or

broken

1. Check the power

supply properties.

Check the switch

functionality and

position.

Check the safety fuse.

2. Switch off the engine.

Fan starting

and flame

not beginning

to burn or

going out

immediately.

1. Ignition

system is not

working.

2. Flame

control is

faulty.

3. Photocell is

not working.

4. No or

insufficient

amount of oil

getting to the

burner.

5. Electric

valve is not

working.

1. Check the ignition

cabling to the

electrodes and

transformer. Check

the position of the

electrodes. Check

whether the electrodes

are clean. Replace the

ignition transformer.

2. Replace the

appliance.

3. Clean or replace the

photocell.

4. Check the pump-

engine connection.

Check whether there

is air in the fuel piping.

Check the hoses and

filter sealing. Clean

the nozzle and replace

it if necessary.

5. Check the plugging.

Clean the electric

valve and replace it if

necessary.

Fan starting

and flame

beginning to

burn but

smoking.

1. Combustion

air is not

sufficient.

2. The fuel

used is dirty

or contains

water.

3. Air in the fuel

piping.

4. Oil volume in

the burner is

insufficient.

5. Too much oil

in the

burner.

1. Remove all possible

obstacles and

obstruction at the air

inlet or outlet. Check

the air inlet ring gauge

position. Clean the

screen.

2. Replace the used oil

with fresh oil. Clean

the oil filter.

3. Check the tightness of

hoses and the oil filter.

4. Check the pump

pressure value. Clean

or replace the nozzle.

5. Check the pump

pressure value.

Replace the nozzle.

Generator

not pausing.

1. Electric

valve

sealing is

defective.

2. Fan

thermostat

defective.

1. Replace the electric

valve body.

2. Replace the fan

thermostat.

Flame

blasting off

the appliance

in the front.

1. Insufficient

air inlet in

the

combustion

chamber.

1. Check the fan. Check

the air inlet.

Maintenance and storing

Keep the air slot and body with no dust and dirt.

For cleaning purposes, use a soft cloth and fine soap

solution. Prevent direct appliance contact with aggressive

cleaning agents. Aggressive, volatile and caustic cleaning

agents must not be used.

The appliance needs to be protected against moisture and

dust.

If the appliance is not used for a long time, store it in a

covered state in a dry, safe place inapproachable to

children.

Caution:

Do not service the appliance when plugged, being

operated or hot. The failure to do so could lead to

serious burns and electric shock.

Regular maintenance:

Part Frequency

Fuel tank (pic. F)

To be rinsed out every 150 – 200

running hours or as needed

Air filter

(pic. G)

To be washed with water and soap

and let dry out every 500 running

hours or as needed.

Fuel filter

(pic. E)

To be cleaned two times during the

heating season or as needed.

Ignition

electrodes

(pic. C)

To be checked every 500 running

hours; distance 4-5 mm.

Fan blades

To be cleaned every season or as

needed; fan wheel screw to be

tightened with hand.

Engine

Maintenance-free, with permanent

lubrication.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GD 50 IK 85111 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GD 50 IK 85111 Manual

Product: