Manual Gude GBS 200 83810 (page 9 of 56) (English, German, Dutch, French, Italian)

624767

Zoom out

Zoom in

1/56

Technical specifications:

Engine output: 250 W S2 15 min

Connection: 230V~50Hz

Bandsaw blade speed: 15.7 m per second

Bandsaw blade length: 1,425 mm

Bandsaw blade pulleys: 205 mm

Max. clear height: 80 mm

Max. clear width: 190 mm

Table size: 300 x 300 mm

Weight: app. 15 kg

General safety instructions

The Operating Instructions must be read

thoroughly before using the machine for the first time.

If there are any doubts regarding the machine

connection, please contact the manufacturer (service

department).

TO ENSURE HIGH SAFETY LEVEL, PLEASE FOLLOW

CAREFULLY THESE INSTRUCTIONS:

CAUTION!

 Keep the place of your work clean and tidy. Mess

in the place of your work and work-table increases

the risk of accidents and injuries.

 Consider carefully the conditions of the

environment you are working in. Do not use any

electric tools and machine tools in a wet and moist

environment. Provide adequate lighting. Do not

expose any electric tools to rain or high air humidity.

Do not switch electric tools on near highly flammable

liquids and gases.

 Do not let other persons get near the machine.

Keep all visitors and bystanders, especially children

and ill or weak persons, in a safe distance from the

place of your work.

 Make sure tools are kept safe. Keep any tools you

are not using in a dry place, elevated if possible, or

lock them to prevent other persons accessing them.

 Use the right machine for your work. Do not use

e.g. small tools or accessory equipment for works that

actually need to be performed by big tools. Use the

machine only for purposes for which it has been

designed. Do not overload your machine!

 Look out for the feeder cable. Do not pull the cable.

Do not use the cable to unplug the machine. Keep the

cable out of reach of heat sources, oil and sharp

edges.

 Avoid any unintentional switching-on. Before

plugging the machine, make always sure the machine

is switched off.

 Special extension cables to be used outdoors. To

use the machine outdoors, special extension cables

appropriate for that purpose and adequately labelled

must be used.

 Be cautious at all times. Pay attention to what you

are doing. Use common sense when working. Do not

use any electric tools when you are tired.

 Watch for any worn parts. Inspect the machine

before using it. Are any parts damaged? In case of

slight damage, consider seriously whether the

machine can work perfectly and safely.

 Prevent electric shock. Avoid any physical contact

with grounded items, e.g. water pipes, heating units,

cookers and fridges.

 Approved parts to be used only. Identical spare

parts to be used only for any servicing or repair. For

that purpose, contact an authorised service centre.

 Caution! Using accessory equipment and extensions

not explicitly recommended in these Operating

Instructions may pose a risk to persons and property.

 Do not incline from the place of your work

Avoid any abnormal body posture. Provide safe

posture and keep balance at all times.

 Do not leave any adjusting wrench in the machine

Before starting the machine, check whether

adjustment wrenches and tools have been removed.

Machine-specific safety instructions

Learn your machine using the Operating Instructions

 Protection covers must not be removed

 Before starting the machine, remove any adjustment

wrenches and tools

 Keep the place of your work clean

 Keep children and bystanders in a safe distance from

the place of your work

 Do not overload your machine

 Use the right machine with no defects

 Wear appropriate closefitting clothes

 Wear protective glasses

 Hold the cut material properly

 Never leave the machine unattended

 The machine must not be used after you have

consumed any drugs, alcohol or pharmaceuticals.

Additional safety instructions for using band saws:

 Adjust the bandsaw blade guide so that it protrudes

not more than 3 mm above the highest edge of the

cut material

 Keep your fingers and hands in a safe distance from

the bandsaw blade

 To move the cut material, use appropriate accessory

 Switch the machine off first and then remove any

cuttings off the table

 Setting and adjusting to be performed only when the

machine is unplugged

 Protection covers of the band saw must not be

removed

 All adjusting elements must be secured against any

unintentional adjustment change

 Hold the cut material safely and work with balanced

pressure

 Approved bandsaw blades to be used only.

Noise may reach a level of 80 dB(A) when the machine

is being operated, therefore you should wear earmuffs.

Behaviour in case of emergency

First aid kit must always be available in the place of your

work in case of accident in accordance with DIN 13164.

Material taken out of the first aid kit needs to be

supplemented right away.

If help is needed, please provide the following details:

Place of accident

Accident nature

Number of injured persons

Injury type

Provide necessary first aid treatment corresponding to the

injury nature and seek qualified medical help as soon as

possible. Protect the injured person from other injuries and

calm him/her down.

Disposal

Disposal instructions are illustrated in the form of

pictograms on the device or packaging. Description of the

pictograms is given in "Identification" chapter.

Disposal of transport packaging

Packaging protects the device against damage during

transport. Packaging materials are usually selected

according to their effect on environment and disposal

methods and can therefore be recycled.

Returning of the packaging back to circulation saves

resources and costs for packaging disposal.

Parts of the packaging (e.g. foil, styropor) may be

dangerous for children. Risk of suffocation!

Keep these parts of the packaging out of reach of children

and dispose as soon as possible.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GBS 200 83810 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GBS 200 83810 Manual

Product: