Manual Gude GBF 550 - 48140 (page 14 of 64) (English, German, Dutch, French, Italian)

623151

Zoom out

Zoom in

1/64

• If the machine is turned off, remove the chips by a

brush.

• Before starting the work check the function of safety

devices.

• Do not overload the machine. It works better within the

stated output power range.

• Use the right machine and make sure that the tools

(turning tool, driller, etc.) are not blunted or damaged

otherwise.

• Always place cables behind the machine. Protect them

from heat, oil and sharp edges.

• Before repair and maintenance and when not in use

unplug the cord.

• Works on electric devices can be done by professional

only. Only original spare parts can be used.

• Tidy work place makes work easier.

• Be careful what you are doing. Use common sense.

• Ensure that the machine base can carry its weight and

is stabile enough. Vibrations must be avoided while in

operation.

• All parts were greased as an anticorrosive protection

in the workshop. Clean the machine before use with

ecological cleaning detergent.

•

Close the safety guard of jaw chuck

absolutely before start up of the machine.

• Do not process hazardous or dusty materials like

wood, Teflon, etc.

• Do not use the machine close to the flammable fluids

or gases.

• Use the machine in suitable areas and do not expose

it to wet or humidity.

• Ensure proper lighting when working.

• Do not pull the power cord to unplug.

• Make sure that the workpiece is always fastened

properly when processing. Fix it in vice or by using

clamping clips.

• Always use clean and sharp tools.

• When in dangerous situation, turn the machine off and

unplug it.

• When damaged, the machine cannot be operated and

must be unplugged.

You can use inserting tools and

accessories approved by manufacturer only. Using

of unapproved parts bears great risk of injury.

• Keep your workplace clean and tidy. Messy workplace

can cause accidents.

• Always wear safety goggles when operating the

machine. If the work generates dust, dust mask is

recommended.

• Chuck keys and other tools must be removed before

start up of the machine.

Use the shift bar to adjust revolutions only

when the machine is on hold!

Emergency Action

Apply the first aid adequate to the injury and get qualified

medical assistance as quickly as possible. Protect the

injured person from more accidents and calm him/her

down.

For the sake of eventual accident, in accordance with

DIN 13164, a workplace has to be fitted with a first-aid

kit. It is essential to replace any used material in the

first-aid kit immediately after it has been used. If you

seek help, state the following pieces of information:

1. Accident site

2. Accident type

3. Number of injured persons

4. Injury type(s

Using the machine for intended use only

This machine is designed for drilling, deep and end milling of

small workpieces (max. dimensions: 300 mm x 200 mm x 200

mm) made of metal, plastic and similar materials. Serial chuck

with ring gear can be used only with drills and mills with

cylindrical shank of max. 16mm. when working metal (ST37),

the tool diameter cannot exceed 13mm. It is also possible to fix

tools with conical shank directly into working spindle (MK3).

This drill and mill is designed for domestic use only and cannot

be used industrially. Machine can be used for intended use

only. Any other use of the machine contradicts its design.

Residual risk and safety measures

Direct electric contact

Defected power cord or plug can cause electric shock.

Defected cords and plugs must be replaced by qualified person.

Use the machine only with residual current device (RCD)

connected.

Indirect electric contact

Injuries caused by conductive machine parts when the

machine is opened or in case of design errors.

Always plug the cord out when maintaining.

Use the machine only with residual current device (RCD)

connected

Insufficient local lighting

Insufficient lighting means great safety risk.

Always arrange proper lighting when working with the machine.

Disposal

Disposal instructions are made clear in pictograms on machine

label resp. package. You can find pictograms description in

chapter “Labeling”.

Disposal of transport package

Package protects machine against damage during the

transport. All packing materials are chosen to comply with strict

environmental waste disposal standards and can be therefore

recycled.

Recycling saves resources and minimizes waste existence.

Parts of the packing material can be dangerous to children (e.g.

plastic wrap, styropor). Risk of suffocation!!!

Package parts keep away from children and dispose it as soon

as possible.

Operation requirements

Operating personnel must read the manual carefully before use.

Qualification

There is no need for any special qualification except for detailed

training by qualified person.

Minimum age

Operate the machine can only people 18+ years old familiar

with manipulation and all functions of the machine. Youth

between 16 and 18 years can operate the machine only under

the supervision of an adult.

Exception is made when using by youths during the

occupational training to achieve exact skills under the

supervision of a trainer.

Training

There is a corresponding course needed only to operate this

machine. No special training is necessary.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GBF 550 - 48140 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GBF 550 - 48140 Manual

Product: