627519

Gude GAK 715 TELE 95163 Manual

19
Zoom out
Zoom in
Previous page
1/80
Next page
CAUTION: To support the saw, use the stop surface
on the cutting head at all times!
After starting the cut, guide the rotating chain to the wood.
Keep the chain saw firmly in hands to prevent any rejection or
slip (lateral movement) of the saw.
5. Guide the chain saw with slight pressure. Do not
overload the chain saw. Otherwise, the engine may get
overloaded and burn down. The saw works better and
safer at the specified speed.
6. Move away from the cut with the chain saw when still
running at full speed. Switch the chain saw off by
pressing the starter. The chain saw must be stopped to
the full extent before being put away.
CAUTION:
Prevent any backlash. A backlash may cause serious
injuries.
Do not use the chain saw when standing on a ladder or
any other unstable equipment and when in an unstable
position.
Contact a professional to help you if circumstances
require use of bigger appliances.
Servicing and treatment
CAUTION: Follow the chain saw servicing
instructions. Servicing works specified in the instructions
must be performed by an authorised service centre.
CAUTION: Unplug the chain saw before any
servicing. Electric shock or contact with the rotating chain
could cause serious injuries. The cutting edges are sharp.
Wear protective gloves when handling the chain.
Saw body cleaning
Keep the saw body clean. Use a soft cloth soaked in fine soap
water. Use the soft cloth to wipe the saw body. Do not plunge
the saw to liquids. Do not use cleaners containing ammonia,
chlorine or emery. Do not use clearing baths containing
chlorine, carbon tetrachloride or petrol.
Oil tank filling
Remove the oil tank cover (pic. 2/1).
Add biodegradable oil for chains to the oil tank (pic. 2/2).
Refit the oil tank cover (pic. 2/1). Tighten the oil tank
cover (pic. 2/1). This will prevent oil from leaking from the
tank.
Wipe any excess oil. Drain the oil tank (pic. (2/2) after
each use to prevent it from overflowing.
Chain bar treatment
Uneven wear is the cause of the most frequent problems with
the chain bar. An unauthorised treatment of cutting elements of
the chain and improper depth limiter grinding may amplify that.
If this is the case, replace the chain bar. Check the chain bar
before saw sharpening. A worn-out or damaged chain bar is
not safe and damages the chain, which is why it must not be
used!
Regular chain bar servicing
1. Remove the chain bar off the chain saw.
2. From time to time, remove the wood flour from the chain
bar notch. In doing so, use the glazing or wire knife.
3. Oil grooves to be cleaned after the day when used.
4. Remove any inequality on sides of the chain bar. Use a
blunt file for flat filing of edges.
5. Do not fit the chain bar if bent or cracked or if the inner
rail notch is significantly worn-out.
Do not use clearing baths containing chlorine, carbon
tetrachloride or petrol. The chain bar that is to be replaced
can be received as a spare part.
Saw chain sharpening
The chain must always be sharp!
Cutting is then faster and safer. A blunt chain causes useless
wear of the chain wheel, chain bar, chain and the engine. The
chain is blunt if it needs to be pressed to the wood and the
cutting results in wood flour and some bigger fractions.
Saw chain changing
Change the chain if the cutting elements are too worn-out after
repeated sharpening or if the chain faces a risk of breaking. A
spare chain mentioned in these Operating Instructions to be
used only. The chain wheel must also be changed when
changing the chain. By this, the chain will be driven properly.
Do not use clearing baths containing chlorine, carbon
tetrachloride or petrol. The chain and chain wheel can be
received as a spare part and accessory equipment.
Service
Any technical questions? Complaint? Do you need spare
parts or operation manual?
Go to our website www.guede.com and the section Service
will help you quickly and without bureaucracy. Please, help us
to help you. In order to identify your device in case of
complaint, please indicate serial number, order number and
year of manufacture. All information is available on the product
label. To have all information always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
19
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GAK 715 TELE 95163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GAK 715 TELE 95163 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info