Manual Gude GAK 715 TELE 95163 (page 18 of 80) (English, German, Dutch, French, Italian)

627519

Zoom out

Zoom in

1/80

Warranty

A warranty period of 12 months applies to commercial use and

24 months apply to private use and commences on the day of

purchase of the device.

Warranty applies exclusively to failures due to defective

material or workmanship. An original sale slip with indication of

date of sale must be presented in case of claiming for the

warranty rights.

Warranty does not cover unprofessional use such as device

overload, violent use, damage caused by third party or foreign

materials, failure to comply with operations and assembly

manual, and normal wear and tear.

Behaviour in case of emergency

Apply the first aid adequate to the injury and get qualified

medical assistance as quickly as possible. Protect the injured

person from more accidents and calm him/her down.

For the sake of eventual accident, in accordance with DIN

13164, a workplace has to be fitted with a first-aid kit. It is

essential to replace any used material in the first-aid kit

immediately after it has been used. If you seek help, state

the following pieces of information:

1. Accident site

2. Accident type

3. Number of injured persons

4. Injury type(s)

Use as designated

The electric pole chain saw has been designed for treating

trees and wood species for private purposes. The

manufacturer cannot be held liable for any damage if

provisions of generally applicable regulations and these

Operating Instructions are not followed.

Area of use:

Care of wood species with height of up to app. 5-6 m,

depending on the body height.

Disposal

The disposal instructions are based on icons placed on the

appliance or its package. The description of the meanings can

be found in the “Marking“ section.

Transport package disposal

The package protects the appliance against damage during

transport. Packing materials are usually chosen depending on

their environmental friendliness and disposal method and can

therefore be recycled. Returning the package to material

circulation saves raw materials and reduces waste disposal

costs. Parts of packages (e.g. foils, styropor®) can be

dangerous to children. Risk of suffocation! Keep parts of

packages away from children and dispose them as soon as

possible.

Operator requirements

The operator must carefully read the Operating Instructions

before using the appliance.

Qualification

No special qualification is necessary for using the appliance

apart from detailed instruction by an expert.

Minimum age

The appliance can only be operated by persons over 18 years

of age. An exception includes youngsters operating the

appliance within their professional education to achieve

necessary skills under trainer's supervision.

Training

Using the appliance only requires appropriate instructions by a

professional or reading the Operating Instructions. No special

training necessary.

Transport and storage

If the saw is to be stored for more than 30 days, the following

steps need to be taken:

1. Drain the oil tank.

2. Remove and clean the chain bar and chain. Clean the

chain bar and chain by soaking to kerosene solvent or

fine soap water.

3. Dry the chain bar and chain out.

4. Put the chain to a tank filled with oil. This will prevent

corrosion.

5. Apply a thin oil layer on the chain bar.

6. Wipe the outer part of the saw body with a soft cloth

soaked to fine soap water.

7. Store the chain saw in an elevated and locked place

inaccessible to children.

8. Store the chain saw in a dry place in a plastic bag or with

a cover on the chain bar.

Names and terms

Chain bar: Metal rail protruding from the saw body: The chain

bar supports and guides the chain.

Backlash: There may be a dangerous backlash when the

upper quadrant of the chain bar point touches an item while

the chain is moving. The chain bar gets suddenly shot up and

towards the operator.

Oil lubrication system: Chain bar and chain lubrication

system.

Saw chain (chain): Chain loop with cutting teeth that cut

wood. The chain is engine-powered. The chain leans against

the chain bar.

Chain wheel: Gear wheel driving the chain.

Switch: A device closing or opening the electrical circuit to the

saw engine.

Switch fuse: A device eliminating unattended saw starting.

Starter: A device switching the saw on and off. The saw is

started by pressing the starter. The saw is switched off by

releasing the starter.

Sawing out (pruning): Steps for cutting branches on a living

tree.

Bottom cut: Upward guided cut from the bottom side of the

tree trunk or branch. Performed in a standard cutting position

and with the chain bar point cut.

Safety instructions for the operator

 Do not use the appliance before reading carefully the

Operating Instructions.

 Follow all safety instructions included in the Operating

Instructions.

 Behave responsibly to other persons.

 Walk, do not run when working.

 Use the right working clothes at all times.

Operation

1. Connect the saw with the extension cable. Plug the

extension cable.

2. Use both hands to hold the saw. When operating

the chain saw (pic. 10), use only the specified points of

gripping. Hold the saw properly. Thumbs and fingers

must embrace the chain saw handle and pole.

3. Make sure your legs are positioned properly. Distribute

your weight evenly to both legs.

4. To start the appliance, press the stop first and then

On/Off. By this, the chain saw will be started. The chain

saw gets switched off by releasing On/Off. Make sure

the saw runs at full speed before performing first cut.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GAK 715 TELE 95163 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GAK 715 TELE 95163 Manual

Product: