622215
7
Zoom out
Zoom in
Previous page
1/34
Next page
GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Illustrative pictures! Translation of original operating instructions.
Signs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual and/or on the unit:
Product compliance with
respective EU standards
Warning/Caution
Read instruction manual
before use
Wear goggles and ear pro-
tectors
Use protection gloves
Operating pressure Number of strokes Connecting thread Air consumption Knife length
Weight
Wastes to be disposed of
in a professional manner
not to harm the environ-
ment.
Keep away from moisture
Cardboard packaging to be
collected for recycling.
The package should be
held upwards
Fragile
Using the appliance as designated
The pneumatic cutter is an appliance for craft purposes that is ideal for:
sheet metal cutting or shearing, rivet head removing or perforating. Any other use is considered a use in conflict with the appliance
designation.
Appliance description
1. Return spring
2. Button
3. Adjusting screw
4. Air connection
5. Cylinder
6. 5 cutters
7. Oil bottle
8. Clutch
9. Mini oil can
General safety instructions
These Operating Instructions need to be read thoroughly before using the appliance for the first time. If any doubts regarding the
appliance connection and operation arise, please contact the manufacturer (service department).
TO ENSURE A HIGH SAFETY LEVEL, PLEASE FOLLOW CAREFULLY THESE INSTRUCTIONS:
After removing the package, check whether the appliance and all other parts are in a perfect condition.
Risk of explosion! Do not work in an explosive environment. Do not exceed the specified operating pressure (see Technical
specifications). Compressed air should be used as the only source of energy. Pay attention to electric lines, gas conduits,
fuel lines and tanks.
Risk of knife being thrown off! Make always sure the knives are fitted appropriately. No idle cycle. Touching the knife is
prohibited when the appliance is running!
Keep the place of your work clean and tidy! Mess in the place of your work and work-table increases the risk of accident
and injury.
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude druklucht set-40065 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude druklucht set-40065 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info