622215
9
Zoom out
Zoom in
Previous page
1/34
Next page
Servicing and maintenance
Servicing may only be provided by trained persons.
Long operating life and failure-free operation of this high-quality product will be provided by following the servicing instructions
specified in this manual. Disconnect the appliance from the compressed air source for servicing and maintenance purposes. To
ensure permanent failure-free operation of the appliance, everyday cleaning and regular lubrication need necessarily be provided.
For that, special pneumatic oil must be used only. Our special pneumatic oil for oil-fog lubricators #40060 is recommended.
The following options are available for lubrication purposes:
a) using an oil-fog lubricator
The full maintenance unit includes an oil-fog lubricator (e.g. Güde ¼“ SB #41080 lubricator) and is placed on the compressor.
b) using a pipeline grease box
A grease box (e.g. Güde #41086) sufficiently supplying the appliance with oil is installed on the pipeline in the immediate vi-
cinity of the appliance (distance of app. 50 cm).
c) manually
If no maintenance unit or pipeline grease box is available for your appliance, 3 - 5 oil drops must be added to the compressed
air connection every time you are going to put the pneumatic appliance into operation. If the pneumatic appliance has been
out of operation for a couple of days, 5 – 10 oil drops must be added to the compressed air connection before starting the ap-
pliance. Keep the pneumatic tools and appliance in dry spaces.
Caution:
Replace the spring (pos. 1) from time to time
Failure – cause - removal
Failure Cause Removal
Air control is set to a too low value. Set the air control to a higher value.
Knife is worn out. Replace the knife.
Operating (hydraulic) pressure is too
low.
Increase the operating (hydraulic) pres-
sure while respecting the maximum op-
erating pressure value.
Too low output of the compressor. Use a compressor of different output.
Too small diameter of the hose. Use a hose of appropriate diameter.
Cutter not working properly
Bypass valve is worn out. Contact the manufacturer or an author-
ised service partner.
Service
Any technical questions? Complaint? Do you need spare parts or operation manual?
Go to our website www.guede.com and the section Service will help you quickly and without bureaucracy. Please, help us to
help you. In order to identify your device in case of complaint, please indicate serial number, order number and year of manufac-
ture. All information is available on the product label. To have all information always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude druklucht set-40065 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude druklucht set-40065 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info