623628

Gude DHH 1050-7 T ECO 01955 Manual

14
Zoom out
Zoom in
Previous page
1/119
Next page
• Tool change, adjustment, cleaning, maintenance and fault removal must only be performed when the
engine is switched off. Pull the plug out of socket!
• All protective and safe equipment must be refitted immediately after repair and maintenance are finished.
• Put the splitter on a flat and nonslip operating surface before using it. Ensure sufficient free movement.
• Never use the wood splitter when raining.
• Line voltage must correspond to the details on the appliance type label.
• Unwind the cable to the full extent when a cable drum is used to prevent it from heating.
• The socket must be fitted with a safety switch against stray current when working outdoors.
• The processed piece of wood must always be put on the appliance surface in a stable position to prevent
it from moving.
• Do not split soaked wood.
• Only one piece of wood should always be split.
• Do not split wood containing foreign items.
Technical Data
Motor power P1 4,1 kW (5,6 PS)
Output shaft speed ----
Ordering No. 01955
Maintenance and Care
Always keep the machine clean.
Change the hydraulic oil every 500 operating hours. Use commonly sold hydraulic oil
(HLP 46). Grease the cleaving column before every use to increase the service
life of sliding jaws. Only genuine spare parts should be used for replacement.
Check hydraulic houses and hose connections for leakage and rupture on a regular
basis.
Caution: Always replenish the oil with the cleaving column retracted!
Control Arms and Cleaving Cross Installation
Control Arms
1. Insert the control arm and tuck the pipe in the cross member
well.
TIP: Before doing that, grease the metal lap plates up and down!
Technical Data Typ 1050/7 T ECO
h x w x l 1540 x 600 x 900 mm
Wood maximum length 1040 mm
Wood maximum diameter 400 mm
Maximum cylinder stroke 515 mm
Rated cleaving force 7 t
Forward movement speed ca. 0,05 m/sek.
Backward movement speed ca. 0,1 m/sek.
Oil capacity ca. 4 Liter
Mode of operation S
6
Hydraulic pressure 220 bar
Weight ca. 129 kg
Fetten
1
14
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude DHH 1050-7 T ECO 01955 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude DHH 1050-7 T ECO 01955 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 8,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info