623630
32
Zoom out
Zoom in
Previous page
1/92
Next page
28
GB
Failure removal
Failures Causes Removal
Engine does not start No power in the socket Check the fuse
Defective electric extension cable Pull the plug out, check it, replace it
Wrong connecting cable 5-wire connection at 2.5 mm
2
cross
section
Defective condenser switch Have the machine checked by a
professional electrician
Wrong engine rotation direction Wrong connection Use a screwdriver to turn the phase-
changing switch in the power supply
Splitting knife is not moving Adjust the two-hand control and
starting levers
Defective control valve - to be
replaced in a service centre only
Splitter has no power
Wrong rotation direction Have the rotation direction changed
by a professional
Few hydraulic oil Hydraulic oil to be added
Trigger is bent; hydraulic piston on
the valve is not fully seated
Check all screws on the trigger
Adjust the trigger so that the
hydraulic piston on the valve is fully
seated
Wood has many knobs and the
splitting knife is getting stuck
Lubricate the splitting knife
Control arm is bent Put the control arm back to the
starting position
The green supply button does not
hold after being pressed
Defective fuse, etc. Check the cable
2-phase running
Hydraulic pump is whistling, split-
ting knife running jerkily
Oil loss, bottom contamination Tighten the screws replace the hose
Few hydraulic oil Hydraulic oil to be added
ENGLISH
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles bure-
aucracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label. Please enter
it here for future reference:
Serial No.:
Art. No:
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude Basic 8T-D 02025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude Basic 8T-D 02025 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info