623630
30
Zoom out
Zoom in
Previous page
1/92
Next page
26
GB
ENGLISH
Residual risks
Dry and dried-up wood may jump up when
being split and injure the face of the operator.
Adequate protective clothes to be worn!
Wooden pieces produced during splitting
may fall down and injure legs of the operator.
When splitting wood, parts of body may be
crushed or separated due to hydraulic knife
lowering.
There is a risk of branchy wood getting stuck
when being split. Please be advised that wood
being separated is under heavy pressure and
your ngers may get squeezed in the gap.
Caution!
Pieces of wood cut at the right angle to be split
only!
Diagonally cut pieces of wood may slip when
cutting!
This may cause personal injury or damage to the
splitter knife especially when using the gap
extension by wedge!
Requirements for operating sta
The operating sta must carefully read the Opera-
tingInstructions before using the appliance.
Qualication: Apart from the detailed instructions
by aprofessional, no special qualication is necessa-
ry forappliance using.
Minimum age: Persons over 18 years of age can
only workon the appliance.An exception includes
youngsters trained in order to reachknowledge
under supervision of the trainer duringoccupational
education.
Training: Using the appliance only requires corre-
spondingtraining by a professional or the Operating
Instructions. Nospecial training is necessary.
Emergency procedure
Conduct a rst-aid procedure adequate to the
injury and summon qualied medical attendance as
quickly as possible. Protect the injured person from
further harm and calm them down. For the sake of
eventual accident, inaccordance with DIN13164, a
workplace has to be ttedwith a rst-aid kit. It ises-
sential to replace any usedmaterial in the rst-aid
kitimmediately after it has been used.
If you seek help,state the following pieces ofinfor-
mation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Maintenance
Unplug the machine before any work on it..
Carry out a visual inspection before any use to make
sure the appliance, especially the cutting tools,
fastening parts and the entire cutting unit are not
damaged.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
The hydraulic hoses and connections must be che-
cked if tight enough after app. 4 hours of operation
and tightened if necessary.
If the device is defective, the repair has to be made
exclusively by the customer service.
Use only original accessories and original spare parts.
Never clean the machine and its components with
solvents, ammable or toxic liquids. Us only a damp
cloth making.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insucient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at
www.guede.com.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude Basic 8T-D 02025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude Basic 8T-D 02025 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info