Manual Gude Airbrush set 50068 (page 8 of 72) (English, German, Dutch, French, Italian)

622220

Zoom out

Zoom in

1/72

Unit Description (Fig. 2)

1. Air and paint quantity control lever

2. Paint supply fixing lock screw

3. Blow ing nozzle

4. Nozzle cover

5. Paint container connection

6. Air supply connection

7. Plastic cover

Warranty

A w arranty period of 12 months applies to commercial use

and 24 months apply to private use and commences on the

day of purchase of the device.

Warranty applies exclusively to failures due to defective

material or w orkmanship. An original sale slip w ith indication

of date of sale must be presented in case of claiming for the

w arranty rights.

Warranty does not cover unprofessional use such as device

overload, violent use, damage caused by third party or foreign

materials, failure to comply w ith operations and assembly

manual, and normal w ear and tear.

General Safety Instructions

Before initial operation, this instruction manual should be read

completely. If in doubt w ith regard to connection and

operation of the unit, consult the manufacturer (servicing

department).

TO PROVIDE FOR HIGH DEGREE OF SAFETY, READ THE

INSTRUCTIONS BELOW CAREFULLY:

Notic e: Operate with current protection only!

Caution!

• Keep your workplace clean and tidy!

A messy w orkplace may be the cause of injury

and accidents.

• Take external effects into account

− Do not expose the machine to the rain.

Pr ov ide for good lighting. Do not use the

machine in proximity of flammable liquids or

gases.

• Do not allow any strangers to the machine.

Bystanders and visitors, children and the sick in

particular should be kept at a sufficient distance from the

w orkplace.

• Provide for safe storage of the tools. The tools

currently out of use should be stored at a dry, locked or

elevated place

• Use appropriate tools!

− Do not use machines of small output to do a

heavy job. Use a machine designed for a

specif ic job.

• Watch out for the cable. Do not pull the cable. When

unplugging, alw ays take a hold of the plug. Keep the

cable at a safe distance from sources of heat, oil and

sharp edges.

• Prevent unintentional switching. Before plugging in,

take care to see that the unit sw itch is in Off position. .

• Use special extension cables when working

outdoors. To w ork outdoors, special extension cables

are required appropriate for the outdoor use and marked

in corresponding w ay.

• Be attentive!

− Mind w hat are you doing. Use common sense.

Do not use the electrical tools w hen feeling

tired and not concentrated.

− Watch out for damaged parts. Before any

further use of the machine, check any

protective devices and slightly damaged parts

thoroughly to see w hether they are capable of

perfect functioning. Check any moving parts

and see that they are free of any jams and

damages. All the parts have to be mounted

correctly and should meet all the conditions of

the machine perfect operation.

− Prevent the electrical shock. Avoid any

contact of your body w ith grounded articles

like w ater piping, radiators, stoves and fridges.

• Use approved parts only. For maintenance and

repairs, use the genuine spare parts only Spare parts

are to be got at an authorised servicing centre.

− Caution! Only accessories and

supplementary devices show n in the operating

instructions or recommended by the

manufacturer are used. Use of optional tools

or accessories other than show n in the

operating instructions or in the catalogue may

give rise to a risk of injury.

Initial Operation Safety Instructions

Before getting dow n to adjustment or maintenance of the unit,

alw ays disconnect is from the source of voltage.

• After removing the packaging, check the unit to make

sure that all the parts are in perfect condition.

• Alw ays wear goggles and ear protectors

Alw ays wear goggles or appropriate eye protecting aids and

hearing protecting aids. Never point at yourself or other

persons w ith the compressed air stream

• Alw ays use electrical shock protection

Never use the compressor near w ater or in w et

environment.

• Compressor shut down

Before repairs, inspections, maintenance cleaning or

replacement of parts, disconnect the compressor from

the source and decompress.

• Unintentional switching on

Do not transport the compressor if connected to the

source w ith the air tank under the pressure. Before

connecting the compressor to the source, make sure

that the check pressure meter is sw itched off.

• Proper storage of compressor

If out of use, the compressor should be stored at a dry

place so that it is protected from w eather effects. Keep it

out of reach of children.

• Work clothes

Do not w ear lose garments or jew els, they could be

caught in the machine. If necessary, w ear ear protector

covering up the ears.

• Correct use of power cable

Never unplug by pulling the cable. Protect the cable from

heat, oil and sharp edges. Do not w alk on the cable and

do not bend it.

• Careful maintenance of compressor

Observe the lubrication instructions (not applicable to the

oil free compressors). Check on the pow er cable at

regular intervals. If damaged it should be repaired or

replaced at a customer servicing shop. Make sure that

there are no visible damaged on the compressor outer

parts. Consult a servicing centre if necessary. .

• Outdoor Use

If the compressor is used outdoors only outdoor

extension cable w ith relevant marking may be used.

Caution: It is necessary to use cables of sufficient

cross section ( 1,5

mm as a minimum), with cables

longer than 10 m, starting up may be difficult at

unfavourable temperatures .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude Airbrush set 50068 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude Airbrush set 50068 Manual

Product: