628923

Gude 85101 GD 20 l Manual

11
Zoom out
Zoom in
Previous page
1/52
Next page
6
3. Fit the heating unit on the wheel support frame. Make
sure the heating unit air inlet (rear) is above the
wheels. Attach the fuel tank flange holes to the wheel
support frame holes.
4. Put the front and rear handle on the fuel tank flange.
Pull the screws through the handles, fuel tank flange
and wheel support frame. After the screw is inserted,
tighten the appropriate nut with your hand.
5. Tighten the nuts after all screws have been inserted.
Safety equipment
The oil hot-air turbine is fitted with an electronic flame
control. The appliance is stopped in case of operating
failure. If the oil hot-air turbine is overheated, thermostat
preventing overheating is activated, which interrupts the
fuel supply; the thermostat is automatically deactivated if
the combustion chamber temperature drops below the
accepted maximum value. The overheating cause must be
identified and removed (e.g. air inlet and outlet blocking or
fan stopping) before putting the oil hot-air turbine back into
operation. To start the appliance again, please follow the
instructions included under "PUTTING THE APPLIANCE
INTO OPERATION".
Putting the appliance into operation
Before putting the oil hot-air turbine into operation and
plugging it in, it is necessary to check whether the power
supply properties correspond to the values on the type
label.
CAUTION:
A safety switch against stray current (RCD) must be
integrated in the circuit to which the oil hot-air turbine
is connected.
All safety measures regarding ventilation, etc. must be
adhered to.
Do not add crude oil to the fuel tank. Close the fuel
tank lid again.
Plug the heating unit feeder cable in a standard socket
with earth contact.
The following must be provided to put the appliance
into operation:
Turn the ON/OFF switch to the ON position: the fan will
start and cause ignition after a couple of seconds.
Ignition may take a few seconds when the appliance is
started for the first time or after it has not been used for a
long time.
The following must be provided to switch the
appliance off:
Turn the ON/OFF switch to the OFF position.
Marking
Product safety:
Product corresponds to
appropriate EU standards
Prohibitions:
Not to be used in residential
area!
No fire, open light and
smoking!
No covering
Warning:
Warning/caution
Warning against dangerous
voltage
Do not use the appliance in
closed spaces!
Warning against flammable
materials
Commands:
General command symbol
Read the Operating
Instructions before using
the appliance
Environment protection:
Dispose waste professionally
so as not to harm the
environment.
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Faulty and/or disposed electric
or electronic appliances must
be taken to appropriate
collection centres.
Package:
Protect against moisture This side up
Interseroh-Recycling
Technical specifications:
Connection Weight
Heating output Turbine output
Tank capacity Fuel consumption
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 85101 GD 20 l at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 85101 GD 20 l in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info