624902
13
Zoom out
Zoom in
Previous page
1/72
Next page
Transport and storage
For transport purposes, the appliance must
necessarily be secured against falling or turning
over
When storing the appliance, it is necessary to make
sure that the appliance is kept in a dry place
inaccessible to children and unauthorised persons.
Clean the appliance thoroughly
before storing it for a long time.
Servicing and treatment
Caution - risk of life by electric shock! Unplug the appliance
before any cleaning and treatment. Caution - risk of appliance
damage! Never clean the appliance under running water or in
rinsing water. Do not use aggressive cleaners or hard items
for cleaning as they could damage the appliance. Wipe the
appliance with a wet cloth from time to time.
The angle grinder itself does not require any special servicing.
At regular intervals and every time the appliance is
to be started, check the wheel if fitted tightly.
Replacing the grinding wheel (pic. IV)
1. Unplug the appliance!
2. Press the lock and let the wheel snap in.
Caution! Press the spindle lock only when the
engine and grinding spindle are idle!
3. Open the clamping flange using the attached spanner.
4. Replace the wheel and retighten the clamping flange
using the spanner.
5. For grinding and dividing from 3 mm and less, the
clamping flange must be fitted in a way the flat side of
the flange sits on the wheel.
Troubleshooting
Problems
Possible causes Measures
Appliance not
rotating
Carbons are worn
out
Dividing or
roughing wheel is
not fitted
Appliance is not
plugged
Cable is damaged
Have the carbons
replaced by an
electrician.
Fit the dividing or
roughing wheel.
Plug the appliance.
Have the appliance
repaired by an
electrician.
Appliance
getting warm
too quickly
Ventilation slots
are obstructed with
dust
Remove the dust
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless
bureaucracy at our webpage www.guede.com in the
Services section. Please help us be able to assist you. To
identify your machine when claimed, we need to know its
serial No., order No, and year of production. All these
details can be found on the type label. Enter the details
below for future reference.
Serial No.
Order No.
Year of production:
Tel. +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
Email: support@ts.guede.com
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 58005 WX 230 SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 58005 WX 230 SE in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 6,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info