624902
11
Zoom out
Zoom in
Previous page
1/72
Next page
Lay the cables in a way to avoid cable damage.
Provide adequate ventilation.
Make sure that bystanders keep sufficient safety
distance!
Keep all items that could get damaged as a result of high
temperatures out of reach of the appliance when it is
being operated.
Do not use the appliance in an environment with
flammable gases, e.g. bilges of boats powered by
gasoline or near propane tanks.
Switch the appliance off after being operated.
The engine must be cooled well when being operated,
which is why the ventilation slots must always be clean.
(WX 125 #58000 angular grinders only) The closed
protection cover must be fitted for dividing. The open
cover may be used for rough machining.
Assembly (pic. III)
1 Protection cover (WX 125 #58000 angular grinders
only) The closed protection cover must be fitted for
dividing. The open cover may be used for rough
machining.
2 Clamping flange
3 Grinding wheel
4 Flange nut
The appliance is ready to be operated after being assembled.
Electrical connection
The angle grinder has been designed for 230 V~50 Hz AC.
To be plugged to outlets with grounding only!
Working voltage: Make sure the working voltage
specified on the type label matches the voltage of your
power supply.
Grinding wheels
Never use a wheel that is bigger than the allowed wheel
diameter. The allowed wheel revolutions must always be
checked before any assembly and use. Revolutions printed
on the wheel must necessarily be higher than the idle speed
of the angle grinder.
Let the grinder run idle for app. 1 minute before
starting your work. Any unbalanced wheel must be
immediately replaced!
Fitting the flange at grinding or dividing wheels
Centering flange
Flange fitting at a grinding wheel with embedded or straight
centre. (pic. V)
Clamping flange
Flange fitting at a dividing wheel with a straight centering
flange. (pic. VI)
Flange fitting at a dividing wheel with an embedded centering
flange. (rotate the flange) (pic. VII)
Work proposal/Roughing grinding
Keep the wheel at 30° - 40° against the workpiece surface
and grind with regular motions.
Dividing grinding
Do not rotate the angle grinder at the edge level when
dividing. The dividing wheel must have a clean cutting edge.
To divide hard stones, a diamond dividing wheel is the best
option.
Caution! Asbestos materials must not be machines!
Caution! Never use dividing wheels for roughing
grinding!
Carbon brushes
Have the carbon brushes checked by an electrician when
sparks are produced excessively. Caution! Carbon brushes
may only be replaced by an electrician.
Residual risks and protective measures
Electrical residual risks:
Risk
Description Protective measure(s)
Direct
electric
contact:
Electric shock RCD
Indirect
electric
contact:
Electric shock
through a medium
RCD
Other risks:
Risk
Description Protective measure(s)
Thrown-away
items and
spraying
liquids
Divided items may
be thrown away by
the grinder and
cause serious
injuries.
Gloves and protective
glasses to be worn at all
times.
Slipping,
tripping or
falling of
persons
The electric cable
and appliance itself
may be a reason of
tripping.
Take appropriate
measures, depending on
the type of installation
(appropriate place,
installation, installation
place marking, etc.).
Marking:
Product safety:
Product corresponds to
applicable EU standards and
directives
Prohibitions:
General prohibition sign
Do not work with long hair
not being covered with a
hairnet!
Do not work with jewels in any
case!
Do not work with a tie or
loose, hanging pieces of
clothing!
Do not use the appliance when
raining!
Do not touch in the
appliance when working!
Do not pull the plug or carry
the appliance by the plug!
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 58005 WX 230 SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 58005 WX 230 SE in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 6,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info