706671
8
Zoom out
Zoom in
Previous page
1/42
Next page
-8-
PHOTO MODE
A photo icon is shown in the upper left corner of the display.
Press the button 1x if you want to make pictures instead of recordings.
Press the button every time you want to take a picture.
PLAYBACK MODE
A playback icon is shown in the upper left corner of the display.
For Playback mode, press the button 2x.
Use the & buttons to scroll through the recordings.
Press to start playback.
Press the button to pause or begin playback again.
MASS STORAGE MODE
You can connect the GUARDO DUAL DASHCAM to your PC by using the supplied USB cable. You
can also use it to backup or playback les/videos on your PC.
Press the & buttons to choose the mode and then press : Mass storage (USB mode) is a
computer interface between a computer and a digital camera which shows the digital camera as
a removable disk drive attached to the computer.
You don’t need to install drivers to use the HD DASHCAM with your PC because these are already
installed by Windows/Macintosh in the Windows/Macintosh pack.
You should connect the HD DASHCAM as following :
1. Make sure the battery is charged.
2. Only use the SUPPLIED USB cable.
3. Turn the DASHCAM ON.
4. Connect the USB cable with the DASHCAM before connecting it to the PC.
5. Select “MASS STORAGE” on the DASHCAM and press the button.
6. The driver will now install itself and in the folder “My computer” on your desktop you will see a
new (hard)disk (it is possible that a window will appear in which you can indicate how you would
like to view the les).
7. You can now see all les in the folder and double-click them to watch the videos using the
standard Windows Media Player or Apple Quicktime (you can select yourself).
Note:
You can also remove the micro SD card from the DASHCAM and place it in a (built-in or optional)
micro SD card reader from your PC or a separate micro SD card reader if you have one. This is a
quicker and easy-to-use solution.
B. MENU SETTINGS
Attention: This menu will not work if Mass Storage mode is activated.
1. Power on the unit with the supplied car charger or by using a fully charged battery.
2. Stop the recording if needed.
3. Press until you have selected the desired mode
#
.
4. Press to enter the menu#.
5. Press & buttons to scroll through the submenu’s.
6. After selection, click to conrm and save the setting.
7. Press to exit the menu.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardo DUAL DASHCAM DDC-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardo DUAL DASHCAM DDC-200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info