580331
7
Zoom out
Zoom in
Previous page
1/46
Next page
PX/QX/RX Version 4.20 User Manual – Issue B
- 7 -
Dual User Code Operation
Where a higher level of security is required a keypad may have been programmed to require two user
codes to be entered before logging a user on to the system. Both user codes must be authorised and
are logged by the system. The authority of the second user code entered is used by the system. The
second user code must be entered within 15 seconds of the first user code.
User Card+PIN Operation
Each user can be programmed with both a PIN and a card. If the user Card+PIN option is
programmed then both codes have to be entered before the user can log on to a keypad.
Using the System
The LCD keypad will normally display the time, date and company name. If a valid code is entered the
user menu will normally be displayed. The default manager code is 0202
1
. Enter this code followed by
the button to log on.
12:00 Mon 27 Sep
Guardall
0 2 0 2
05=Engineer
06=PIN
07=User
08=Tel Number
10=Log-Full
11=Log-Cct
12=Log-User
13=Log-KP
14=Log-Date
15=Log-Alarm
20=Time
24=Holiday
25=Schedule
26=Group Text
28=Late Work
30=Bypass
32=Chime
52=Identify User
71=Copy User
89=Cct Status
=Confirm
LogOff
02=Set
04=Test
Set
Reset Alarms
User
Log-Full
Late Work
Bypass
Time
Unset
-Move -Select
user token on mini keypad or at power up
On a standard keypad, enter the 2 digit code to select an option
Use the and buttons to change the displayed options
Press to move quickly through the menu.
On a Mini keypad, use the and
buttons to change the displayed option.
Press to choose a menu option, toggle
an on/off option or display a list of options.
The menu options shown are for a manager user on a system without access control. The actual
menu options available to a user will depend on the user authority, the system configuration and the
current system status. Refer to appendix A for details. Only 2 options are visible on the display but
any available option can be selected by entering the 2-digit code without viewing the actual option
number. Each menu option is discussed in detail in this manual. If no option is selected the user will
be automatically logged off after 2 minutes. If a chosen option is not available a reason will be
displayed. Refer to appendix D for details. Information about the system may be displayed when
logging on. Refer to appendix E for details.
1
It is recommended that the manager code is changed from the default as soon as possible.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall QX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall QX in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Guardall QX

Guardall QX Installation Guide - English - 46 pages

Guardall QX User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info