570272

Grundig WKC 3201 RDS Manual

20
Zoom out
Zoom in
Previous page
1/28
Next page
ķ
17
GB
Coding
Deactivating the coding
before removing the car radio, for example.
1. The EXPERT mode must be switched on
and "SAFE" indicated in the display.
Activate the setting: briefly press the
¢¢
EXPERT button. In the display flashes
"1 - - - -".
2. Enter the code number (on the Identity Card)
with the r
TUNING t or
¢¢
1…
¢¢
4
buttons as described under "Activating the
coding".
3. Confirm the code number.
Press the
¢¢
EXPERT button until "CODE"
appears briefly in the display.
The radio will play after approximately
3 seconds.
Coding is deactivated!
If you have entered the incorrect code
number:
"SAFE" remains in the display and the radio
does not play.
Begin again. Be sure to observe the waiting
periods between attempts (see page 18).
ǺǺ Your personal code number is on the iden-
tity card of your car radio.
Coding is not activated when the radio
leaves the factory.
If you have “activated” your car radio's
coding: As soon as you disconnect the car
radio from the car battery (or permanent
plus terminal 30), it is electronically
blocked.
Only you are able to put it back into opera-
tion by entering your personal Code Number.
Is the coding activated?
Activate the EXPERT mode and press the
r
TUNING t buttons until the display indi-
cates "SAFE" or "CODE".
Coding activated.
Coding not activated.
Activating the coding
1. Select the EXPERT control level and press
the r
TUNING t buttons until "CODE"
appears in the display.
Activate the setting:
Briefly press the
¢¢
EXPERT button. In the
display flashes "- - - -".
2. Enter the code number (on the Identity Card)
with the r TUNING t or
¢¢
1 …
¢¢
4
buttons (see example).
ǺǺ Hold down the r TUNING t buttons to
alter the number at high speed.
Example: 1703 Display:
Button
¢¢
1 11 brief pressure >1 - - -<
Button
¢¢
2 17 brief pressures >1 7 - -<
Button
¢¢
3 10 brief pressures >1 7 0 -<
Button
¢¢
4 13 brief pressures >1 7 0 3<
Pressing a button a longer time counts the
respective digtit backwards.
3. Confirm the code number:
Briefly press the
¢¢
EXPERT button. In the
display appears "SAFE".
Coding is activated!
4. Deactivate the EXPERT control level:
Press the
¢¢
EXPERT button until the signal
sounds.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig WKC 3201 RDS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig WKC 3201 RDS in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig WKC 3201 RDS

Grundig WKC 3201 RDS User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info