32
SETTINGS
_______________________________________________________________________________
Channel position number ( ? A/B)
1 The channel position number and reception unit is displayed for checking. They cannot be
changed in the menu.
Transmission frequency of the selected satellite channel (
ʐʐ
)
1 You can enter the transmission frequency of the selected satellite channel directly by using
the »1… 0« buttons, or change the value in 1 MHz intervals using the »
;;::
« buttons.
Polarization and switching signal ($)
1 Select horizontal »H« or vertical »V« polarization of the selected satellite channel using
the »
;;::
« buttons.
Note:
When receiving with several satellite aerials or LNCs or with an LNC with a range switch-over,
you can select the signal source by switching the 22 kHz signal and the »A/B« satellite selection
on (»
~
«) or off (»
–
«) using the »
;;::
« buttons.
For more information see the chapter “Multi-satellite reception” on the pages 42 to 45.
Sound settings (
ʀʀǁǁ
)
1 Select the right or left sound channel using the »
,,..
« buttons.
You can now either set the carrier frequency directly, using the numerical buttons »1… 0 «,
or you can alter it step by step using the »
;;::
« buttons.
