34
SETTINGS
_______________________________________________________________________________
»LNC set-up« sub-menu ($)
1 Press the »Ǻ« button followed by the »4 « button to display the »LNC set-up« sub-menu.
»3« will be flashing (the number of the selected LNC arrangement).
Key to symbols:
$
3 LNC arrangement (LNC type, see page 18).
– A1 09.750 GHZ Satellite A selected, LO frequency of the LNC
without
22 kHz switching signal
~
A1 09.750 GHz Satellite A selected, LO frequency of the LNC
with
22 kHz switching signal
– B1 09.750 GHZ Satellite B selected, LO frequency of the LNC
without
22 kHz switching signal
~
B1 09.750 GHz Satellite B selected, LO frequency of the LNC
with
22 kHz switching signal
$
%
✓ LNC voltage supply on (✓) off (
–
)
Ǻ Exit menu
OK Save and exit menu
LNC arrangements ($)
In order to tune the receiver as finely as possible to the various aerial installations, 6 LNC arran-
gements are available for the SAT input.
Depending on the LNC arrangement selected, varying switching signals are emitted when changing
to other channel positions (22 kHz, mini DiSEqC, DiSEqC 1.0) in order to select the LNC required for
reception and its frequency range.
The oscillator frequency of the LNC used must be entered.
The number of possible oscillator frequencies will depend on the LNC arrangement chosen.
The different variations in the LNC arrangements are shown on pages 36 to 38.
–A 09.750 GHZ
$
3
~A 09.750 GHZ
–B 09.750 GHZ
~B 09.750 GHZ
$
%
✓
Ǻ
/
OK