24
TIMER PROGRAMMING
____________________________________________________________
Changing timer data or switching off the timer
1 If you wish to change or delete an existing timer setting, you must first switch on the receiver and
then call up the »Timer« sub-menu (press the »
Ǻ« button and then the numeric button »1«).
2 You can change the current data for channel position, start time or stop time by overwriting, or
,
you can switch off (
–
) the timer function and save using the »OK« button.
The main menu is back on the screen.
3 If you want to exit the »Timer« sub-menu without saving the changes, press the »Ǻ« button.
During a timer recording
While a timer recording is in progress, the red indicator on the front panel of the receiver is lit up
and the green indicator is flashing.
The buttons on the receiver and on the remote control are blocked so that the recording cannot be
disrupted. This means that no changes can be made by pressing the buttons unintentionally.
Only the »
Ǽ« button on the remote control and on the receiver remain unblocked.
Interrupting a timer recording in progress
Switch the receiver to standby by pressing the »Ǽ« button.
??
6
ѕ 13:59
ѕ ●
ı
20:12
ѕ ●■ 22:17
ѕ
✓✓
Ǻ
/
OK
