Manual Grundig SIS 8250 (page 25 of 92) (English, German, French, Polish, Turkish, Spanish)

519693

Zoom out

Zoom in

1/92

ENGLISH

OPERATION _________________________________

7 After the ironing process is complete, place the

iron onto the storage base.

8 Press and hold down the On/Oﬀ switch of

the steam ironing station for a few seconds to

switch the steam ironing station oﬀ. Set the tem-

perature control dial to MIN and disconnect

the plug from the power outlet.

– The red power indicator light

and the

blue steam button indicator light LOW

go oﬀ.

9 Let the appliance cool down in a location that

is safely out of reach of children.

Filling in the water tank

1 Grab the handle

underneath the water tank

and pull the water tank out of the steam iron.

2 Open the lid of the water ﬁlling opening

and ﬁll the water tank with tap water or dis-

tilled water up to the MAX marking. The maxi-

mum capacity is 1.7 litres.

3 Close the lid of the water ﬁlling opening and

push the water tank completely into the steam

ironing station. Make sure that it clicks into

place properly and is secured to the housing

of the steam ironing station.

Caution

Do not move or shake the steam ironing sta-

tion when the water tank is being filled. Water

might spill out from the opening of the water

tank.

4 Press the steam jet button brieﬂy to reset the

iron. After about 10 seconds the iron will be

ready for steam ironing.

Notes

When the water tank is empty, air enters into

the pump causing a louder ‘pumping’ sound.

This is quite normal.

If your tap water is very hard it is recom-

mended to mix the tap water with distilled

water on a 50:50 ratio, or use distilled water

only.

Steam ironing

1 Place the appliance on an even, dry and non-

slip surface. The non-slip feet

ensure the sta-

bility of the appliance.

2 Fill the water tank as described in the section

“Filling in the water tank”.

3 Insert the power plug

into the wall socket.

4 Push the On/Oﬀ switch

to switch on the

steam ironing station.

– The power indicator

lights up red and the

blue steam button indicator light blinks on

LOW

5 Adjust the temperature control dial

to the

desired temperature.

– The temperature indicator light

lights up

blue. The blue temperature indicator light

remains on while the iron is heating up. As

soon as the iron reaches the set temperature,

the temperature indicator light goes oﬀ. The

temperature indicator light will go on and

oﬀ during usage to indicate that the set tem-

perature is being regulated.

Note

Steam ironing is only possible at higher tem-

perature settings between •• and MAX.

6 The water in the water tank heats up within 3

minutes. As soon as the temperature indicator

light goes oﬀ and the control indicator in the

steam button remains lit, the steam iron is ready

to use. Hold the iron in horizontal position on

the garments and press the steam jet button

Continue to move the iron when ironing.

Caution

Never direct the steam at people or pets.

Notes

When the steam ironing station is switched on

it will produce a 'pumping' sound. This is nor-

mal and indicates that water is being pumped

from the water tank into the steam ironing

station.

What to do when no steam comes out of grundig 8250 Submitted on 1-7-2022 at 09:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grundig SIS 8250 in the language / languages: English, German, French, Polish, Turkish, Spanish as an attachment in your email.

The manual is 5,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig SIS 8250

Grundig SIS 8250 User Manual - English - 13 pages

Grundig SIS 8250 User Manual - German - 13 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grundig SIS 8250 Manual

Product: