60
ADJUSTING THE SATELLITE RECEIVER
___________
Adjusting the satellite receiver to the satellite antenna
and the LNB configuration
In order to adjust the satellite receiver in an optimum way to the different antenna
systems, four LNB configurations are available.
Note:
Your antenna technician or specialized dealer which has installed your
antenna system will be glad to provide you with detailed information about
all settings required.
Important!
For every setting you want to use you must enter the oscillator frequencies
(low and high) of the LNBs into the »LNB setup« menu.
The number of the possible oscillator frequencies depends on the selected
LNB configuration.
To ensure the reception of services of different satellites, different switching sig-
nals are emitted when selecting another satellite service in order to select the
required LNB along with its frequency in a unique way.
1 Call up the »Main Menu« on the picture screen using the »Ǻ Menu« button.
2 Select the »System Setup« row using the »
P+, P-
« buttons, and then
confirm with »OK«.
3 Select the »LNB Settings« row using the »
P+, P-
« buttons, and then confirm
with »OK«.
4 Select the »LNB Type« row using the »
P+, P-
« buttons, and then confirm
with »OK«.
5 Select the appropriate LNB Type, depending on the satellite antenna and the
LNB, LNB Type 4 in the example, using the »
P+, P-
« buttons, and then
confirm with »OK«.
LNB Settings
Exit Back
09750 MHz
Low A
LNB Type
09750 MHz
Low B
10600 MHz
High A
10600 MHz
High B
4
Select Satellites
