642164

Grundig Satellit 700 Manual

12
Zoom out
Zoom in
Previous page
1/40
Next page
Automatische Steuerung
eines Cassettengerätes
Der Satellit 700 kann ein Cassetten-
gerät mit positiver bzw. negativer
Steuerlogik bei Schaltuhr-Betrieb au-
tomatisch starten bzw. stoppen. Dazu
muß ein entsprechendes Steuerkabel
angefertigt werden. Die Schaltstufe zur
Steuerung des Cassettengerätes ar-
beitet potentialfrei. Die vom Cassetten-
gerät zugeführte Schaltspannung (max.
30V/500mA) wird an der Schaltaus-
gangsbuchse wie folgt beeinflußt:
Befestigen des Gerätes
Der Satellit 700 läßt sich festschrauben.
Hierzu sind im Boden zwei Gewindelöcher
M4.
Verwenden Sie Schrauben, die mindestens
15mm und maximal 19mm länger sind, als
die Materialstärke der Montageebene.
Memofiles
Sie haben die Möglichkeit beim Satellit 700 durch zusätliche
MEMOFILES (ICs) die Speicherkapazität um 3x 512 Speicherplätzezu
erweitern.
Die Einsteckplätze für 3 MEMOFILES befinden sich hinter der Klappe
unterhalb des Bedienfeldes.
Es ist darauf zu achten, daß das MEMOFILE-IC polungsrichtig einge-
setzt wird. Drücken Sie das MEMOFILE vorsichtig in den jeweiligen IC-
Sockel. Beachten Sie auch die Nummerierung der IC-Sockel. Dies ist
für den MEMOFILE-Aufruf wichtig.
Bezeichnung der MEMOFILES: X24C16-P3
Sachnummer: 8305-602-416
Automatic Control of a
Cassette Recorder
With the Satellit 700 it is possible to
automatically start and stop a cassette
recorder which is equipped with a po-
sitive or negativ control logic circuit.
For this, a special connecting lead
must be built. The switching circuit for
controlling the cassette recorder
operates potential-free. The switching
voltage delivered by the cassette
recorder (max. 30V/500mA) is changed
by the switch jack as follows.
Securing the Unit
The Satellit 700 can be secured to an
appropriate surface. For this, two threaded
holes M4 are provided in its base. Only use
screws which are at least 15mm and max.
19mm longer than the thickness of the
material to which the Satellit is to be
secured.
Memofiles
You have the possibility to increase the memory capacity of your
Satellit 700 by 3x512 memory positions with additionally MEMOFILES
(ICs).
The sockets for inserting 3 MEMOFILESare to be found behind the trap
below the keyboard.
Ensure that the MEMOFILE IC be inserted with correct polarity.
Carfully press the MEMOFILE IC into the respective socket. When
doing this, also observe the numbering of the IC sockets. This is of
impertance when later "calling up" the respective MEMOFILE.
Name of the MEMOFILES: X24C16-P3
Order No.:8305-602-416
min
max
15 mm
19 mm
123
Steuerlogik/Control logic:
SAT 700
Schaltstellung bei
eingeschaltetem Satellit :
Switch position with the
Satellit switched on:
SAT 700
Steuerlogik/Control logic:
RESET
234
PIN 1
Loadspeaker Socket
Contact allocation of the plug for two external
loudspeakers.
Lautsprecher-Buchse
Kontaktbelegung des Steckers für zwei Außen-
lautsprecher.
123
Linker Kanal / Left channel
Rechter Kanal / right channel
+
+
-
-
EXCHANGEABLE MEMORY FILES COPY FUNCTION
AGC MGC
RADIO-DATA-SYSTEM
R•D•S
WORLD RECEIVER
789
0
FREE
TIME
I/II
USB
LSB
MENU
A-Z
0-9
MEMORY
FILE
MEMORY
SCAN
SEARCH
SELECT
FREQUENCY
m-BAND
STORE
SYNCH
CL
Hinweise zum Satellit 700 / Notes for the Satellit 700
Satellit 700
12 GRUNDIG Service-Technik
… 12 …


Need help? Post your question in this forum.

Forumrules
1

Forum

grundig-satellit-700

Reset search

  • hello, is that the service manual or the user manual ? thanks. Submitted on 16-3-2023 at 19:01

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig Satellit 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig Satellit 700 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info